Shark MV3010-FS manual Troubleshooting Guide, Vac-OR-Steamwill not

Page 16

Troubleshooting Guide

PROBLEM

POSSIBLE REASONS & SOLUTIONS

 

Your Vac-OR-Steam™should be securely plugged into a 120V AC electrical

 

 

 

The Vac-OR-Steam™will not

outlet only.

 

turn on.

Check your fuse or breaker.

 

 

Check to make sure the steam or vacuum nozzle is attached correctly.

 

 

 

 

The Vac-OR-Steam™will not

Make sure the water tank is filled to the indicated fill line.

 

Attach Steam Pad and Steam Nozzle to base of the unit.

 

make steam.

 

TILT MOP HANDLE BACK TO GENERATE STEAM.

 

 

 

 

 

 

 

Check to see if your multi-purpose cleaning pad has absorbed too much

 

 

moisture. We recommend you unplug the Vac-OR-Steam™and replace the

 

The Vac-OR-Steam™leaves

multi-purpose cleaning pad.

 

Make sure the steam pad is attached correctly.

 

water on the floor.

 

Wait 30 seconds after choosing the steam setting before mopping, allowing

 

 

 

 

water to heat to a 212°F sanitizing steam. If the unit is not allowed to heat

 

 

properly, some water may be emitted.

 

 

 

 

The Vac-OR-Steam™

Make sure the steam pad is attached correctly.

 

Check to see if the cleaning pad is excessively dirty. Replace if the pad is too

 

is hard to push.

 

dirty or wet.

 

 

 

 

 

 

 

Check filters to see if they need cleaning. Follow instructions for rinsing and

 

 

drying the filters before re-inserting back into the unit. (See “Maintenance”

 

The Vac-OR-Steam™

sections for instructions.)

 

Dust cup may be full. Empty the dust cup.

 

is not picking up dirt.

 

Check nozzle or the air intake hose for blockages. Clear blockages if required.

 

 

 

 

Check that no debris has clogged the brushroll on the vacuum nozzle. Follow

 

 

instructions in “Cleaning the Vacuum Nozzle” section to clean the brushroll.

 

 

 

 

 

The Vac-OR-Steam™is equipped with a motor protective thermostat. If for

 

 

some reason your appliance overheats, the thermostat will automatically turn

 

 

the unit off. Should this occur, perform the following steps to restart the motor

 

 

thermostat:

 

 

1. Step on the foot pedal until it goes to standby mode.

 

 

2.

Unplug the vacuum.

 

The Vac-OR-Steam™turns off

3.

Empty the dust cup and clean filters. (See “Maintenance” sections for

 

on its own.

 

instructions.)

 

4.

Check for blockages in hose, accessories and inlet openings. (See

 

 

 

 

 

“Checking for Blockages” for instructions.)

 

 

5. Allow the unit to cool for a minimum of 45 minutes.

 

 

6. Plug in the vacuum.

 

 

7. Step on the foot pedal to select the vacuum mode and tilt the vacuum

 

 

 

back to start vacuuming.

 

12

TOLL FREE: 1-800-798-7398

MV3010_40_ENG_IB_120713_2.indd 12

12-07-13 1:36 PM

Page 15 Page 17
Image 16
Page 15 Page 17
Contents MV3010 Important Safety Instructions Use only as described in this manualAttempt to Defeat This Safety Feature Do not run the cleaning unit over large- sized objectsPolarized Plug Technical Specifications Steam TechnologyThis Book Covers Model Number MV3010Contents Vacuum Mode Getting StartedAssembly Vacuum Mode AssemblyAttaching the Vacuum Nozzle Vacuum Mode Using Vacuum ModeUsing the Accessories To return to standby mode, step on the pedal once moreEmptying the Dust CUP Never OVER-FILL the Dust CUPEmptying the Dust Screen Component Maintenance Schedule To Clean the PRE-MOTOR FiltersTo Clean the POST-MOTOR Hepa Filter Remove the two foam filters from the unitVacuum Mode Storage Cleaning the Vacuum NozzleTo Reset the Motor Thermostat Checking for BlockagesSteam Mode Assembly Changing to Steam ModeAssembly Steam Mode Filling the Water TankSteam Mode Using Steam ModeLaminate Light cleaning and dusting Marble Remove spots and smaller messes TileStone Sanitize floors Tile Messes and stainsSteam Mode Storage Tilt the cleaning unit back to the upright positionCare of Your MULTI-PURPOSE Cleaning PAD StorageTroubleshooting Guide Vac-OR-Steamwill notPart Ordering PartsFoam & Hepa Filters XFF3010 Multi-Purpose Steam Pad Toll Free EURO-PRO Three 3 Years Limited Warranty Product RegistrationCan

MV3010-FS specifications

The Shark MV3010-FS is a powerful and innovative cleaning solution designed to tackle a variety of household messes with efficiency and ease. Engineered with state-of-the-art technology, this versatile vacuum cleaner stands out for its user-friendly features and exceptional performance.

One of the standout characteristics of the Shark MV3010-FS is its lightweight design. Weighing in at only 12 pounds, this vacuum is easy to maneuver, making it ideal for users of all ages. The upright format allows for easy navigation across different floor types, from carpets to hardwood, without the hassle of cumbersome equipment. Its compact size also ensures storage simplicity, fitting seamlessly into closets or small spaces.

The Shark MV3010-FS employs advanced DuoClean technology, which synergizes two brush rolls to deliver thorough cleaning on both carpets and hard floors. The front brush roll loosens large particles while the soft brush roll pulls in dust and finer debris, ensuring no mess is left behind. This dual cleaning feature minimizes the effort needed to switch between floor types, streamlining the cleaning process.

Another notable technology integrated into the Shark MV3010-FS is the Anti-Allergen Complete Seal Technology, which works in tandem with a HEPA filter to capture and trap 99.9% of dust and allergens. This is particularly beneficial for allergy sufferers or households with pets, as it ensures that allergens are not recirculated into the air while cleaning.

The vacuum includes an array of versatile attachments, such as a crevice tool and dusting brush, which enable users to clean nooks, crannies, and delicate surfaces with ease. Additionally, the 30-foot power cord provides an extended reach, allowing for uninterrupted cleaning of larger areas without the need for frequent outlet changes.

Convenience is further enhanced with features like the easy-to-empty dust cup, which reduces mess during disposal. The powerful suction, combined with intuitive controls, allows users to switch from floor to above-floor cleaning quickly, making the Shark MV3010-FS an all-in-one solution.

In conclusion, the Shark MV3010-FS is a standout vacuum offering a blend of lightweight maneuverability, advanced cleaning technologies, and practical features. It is designed to meet the demands of modern households, providing an efficient and effective cleaning experience that doesn’t compromise on quality or user comfort.
Top Page Image Contents