Shark MV2010WC manual Steam Mode, Upright, Filling the Water Tank

Steam Mode

1

3

CONNECTIONS

English

Do not use chemicals or detergents in your Vac-Then-Steam™. You only need water to achieve super-heated, sanitizing steam.

1

2

ASSEMBLY

1Attach a steam pad onto the bottom of the steam frame, matching the hook and loop fasteners.

2Place the steam frame/pad assembly on the floor with the magnetic connections facing up.

3Place the cleaning unit onto the Steam Frame. THE UNIT MUST BE

UPRIGHT.

IMPORTANT: Steam frame and pad must be attached to the cleaning unit in order to use the steam function.

FILLING THE WATER TANK

1Keep the cleaning unit in the upright position to add water. Turn the water tank cap counter-clockwise and remove from the tank.

2Use the filling flask and pour water into the tank. Do not overfill. Replace the cap on the water tank by turning cap clockwise and tightening.

NOTE: If you live in a hard water area, we recommend using distilled water in your Vac-Then-Steam™.

MV2010WC_11_IB_ENG_100803.indd 8-9

04/08/10 9:38 AM