Shark MV2010WC manual Getting Started Vacuum and Steam Panel, Operating in Vacuum Mode

Page 5

Getting Started: Vacuum and Steam Panel

Vacuum Mode

English

 

The Vac-Then-Steam™ has two operating modes:

VACUUM MODE:

1

DO NOT USE STEAM PAD AND

FRAME IN VACUUM MODE

2

3

STEAM MODE:

1

2

3

After inserting the telescopic handle, your cleaning system is vacuum-ready. Begin vacuuming your hard-surface

floors by tilting the cleaning unit back 3 and pressing the vacuum power button.

1

2

OPERATING IN VACUUM MODE:

1Remove steam pad and frame, if attached. See page 11 for instructions. Vacuum will not activate if steam frame is attached.

2SLIDE THE TOGGLE SWITCH UP to expose the vacuum power button.

3Press the VACUUM POWER BUTTON to the ON “I” position to activate the vacuum.

OPERATING IN STEAM MODE:

1Attach steam pad and frame. Steam mode will not work if the pad and frame are NOT attached. See page 8 for assembly instructions.

2Fill the water tank.

SLIDE THE TOGGLE SWITCH DOWN

to expose the Steam Power button.

3Press the STEAM POWER BUTTON to the ON “I” position. The button will be illuminated red when steam mode is activated.

4Wait 30 seconds to heat water, then

TILT HANDLE BACK TO ACTIVATE STEAM PUMP.

USING VACUUM MODE

1Pull and twist the quick release cord holder to unwrap the power cord completely. Plug in the unit.

2To vacuum, slide the toggle switch until the vacuum power button is exposed. Press the vacuum power mode button to the ON “I” position.

IMPORTANT: You cannot use the vacuum function if the frame and pad are attached to the base of the cleaning unit.

NOTE: Only vacuum sealed and non-carpeted bare floor surfaces. Refer to floor manufacturer guidelines and warnings.

3Place your foot lightly on the top of the cleaning unit base. Tilt the cleaning unit back. Vacuum your floors.

IMPORTANT: Vacuum all surfaces first before steam-cleaning to avoid condensation build-up. Avoid vacuuming after steam mopping.

NOTE: If you vacuum and then steam-clean one room, before moving on to the next, wait 10 minutes for the condensation to clear before vacuuming again.

4

TOLL FREE: 1-800-798-7398

MV2010WC_11_IB_ENG_100803.indd 4-5

www.SharkVacThenSteam.com

5

04/08/10 9:38 AM

Page 4 Page 6
Image 5
Page 4 Page 6
Contents MV2010WC Polarized Plug Do not Attempt To Defeat This Safety FeatureContents Assembly Getting Started AssemblyOperating in Steam Mode Operating in Vacuum ModeSlide the Toggle Switch Down Tilt Handle Back to Activate Steam Pump Using Vacuum ModeEmptying the Dust CUP Vacuum ModeStorage Filling the Water Tank Steam ModeUpright Care of Your MICRO-FIBER Cleaning PAD Steam Cleaning Maintaining Your Vac-Then-Steam Ordering Replacement PartsCare of Your Dust CUP Filters POST-MOTOR FilterWill not make steam Troubleshooting GuideMV2010WC11IBENG100803.indd 04/08/10 938 AM

MV2010WC specifications

The Shark MV2010WC is an innovative and versatile vacuum cleaner that combines advanced technology with practical features to deliver exceptional cleaning performance. Designed for both home and professional use, the MV2010WC stands out with its powerful suction capability and a range of smart functionalities that cater to various cleaning needs.

One of the key features of the Shark MV2010WC is its robust motor, which generates strong suction power. This allows it to pick up debris, dirt, and allergens from a wide variety of surfaces including carpets, hardwood floors, and tiles. This versatility makes it an ideal choice for households with multiple flooring types, ensuring a thorough clean every time.

The MV2010WC also boasts a unique filtration system that captures 99.9% of dust and allergens, making it a fantastic option for allergy sufferers. Its HEPA filter effectively traps microscopic particles, ensuring that the air in your home remains clean and fresh. Additionally, the filters are washable, allowing for easy maintenance and long-term use without the need for costly replacements.

Another remarkable characteristic of the Shark MV2010WC is its lightweight design. Weighing significantly less than traditional vacuum cleaners, it is easy to maneuver around the house and carry from room to room. This makes vacuuming less of a chore and more of a manageable task, especially for those who may have limited strength or mobility.

The MV2010WC features a variety of attachments and tools, including a pet power brush, crevice tool, and upholstery brush. These accessories enhance the vacuum's functionality, enabling users to effectively clean furniture, tight spaces, and delicate surfaces. The pet power brush is particularly useful for households with furry companions, as it efficiently removes pet hair from carpets and upholstery.

Additionally, the Shark MV2010WC incorporates advanced technologies like noise reduction, ensuring a quieter cleaning experience. This feature is particularly beneficial for cleaning during the early morning or late evening hours without disturbing others in the household.

Overall, the Shark MV2010WC is a powerful and efficient cleaning solution that combines performance, versatility, and user-friendly features. Its advanced suction, effective filtration, lightweight design, and extensive range of attachments make it a comprehensive tool for tackling any cleaning challenge. Whether you're managing everyday messes or deep cleaning your home, the Shark MV2010WC is equipped to deliver stellar results, making it a worthwhile investment for any cleaning arsenal.
Top Page Image Contents