Operation, Temperature Regulation | State Industries 198067-000

OPERATION

TEMPERATURE REGULATION

WARNING

HOTTER WATER CAN SCALD: Water heating tanks are intended to produce hot water. Water heated to a temperature which will satisfy clothes washing, dish washing, and other sanitizing needs can cause scalds resulting in serious personal injury and/or death. Some people are more likely to be permanently injured by hot water than others. These include the elderly, children, the infirmed, or physically handicapped. If anyone using hot water in your home fits into one of these groups or if there is a local code or state law requiring a certain temperature water at the hot water tap, then you must take special precautions. In addition to using the lowest possible temperature setting that satisfies your hot water needs, some type of tempering device, such as a mixing valve, should be used at the hot water taps used by these people or at the tank. Mixing valves are available at plumbing supply or hardware stores. Follow manufacturers instructions for installation of the valves. Before changing the factory setting of the thermostat, read the Temperature Adjustment section.

WARNING

KEEPING THE THERMOSTAT SETTINGAT 120°F WILL REDUCE THE RISK OF SCALDS. Never allow small children to use a hot water tap, or to draw their own bath water. Never leave a child or handicapped person unattended in a bathtub or shower.

TEMPERATURE SETTINGS

NOTE: Residential water heating tanks will not supply sanitizing hot water for dishwashers.

The thermostat is factory set at approximately 120°F (Hot) and is adjustable if a different water temperature is desired. Read all warnings in this manual and on the tank before proceeding.

TEMPERATURE SETTINGS

HOT - is a thermostat setting of approximately 120°F, which will supply hot water at the most economical temperatures.

A - is a thermostat setting of approximately 130°F. B - is a thermostat setting approximately 140°F. C - is a thermostat setting approximately 150°F.

VERY HOT - is a thermostat setting of approximately 160°F. It is recommended that the dial be set lower whenever possible.


Temperature	Time to Produce 2nd & 3rd
Setting	Degree Burns on Adult Skin

170°F	Nearly instantaneous
160°F	About 1/2 second
150°F	About 1-1/2 seconds
140°F	Less than 5 seconds
130°F	About 30 seconds
125°F	About 2 minutes
120°F	More than 5 minutes

FIGURE 7

TEMPERATURE ADJUSTMENT

To adjust the temperature setting:

1.Turn “OFF” the electrical power to the water heater, at the junction box.

WARNING

HAZARD OF ELECTRICAL SHOCK! Failure to turn “OFF” electric power to the tank will result in the possibility of DEATH, SERIOUS BODILY INJURY OR PROPERTY DAMAGE.

2.Take “OFF” the access panel and fold away the insulation.

3.Turn the water temperature dial clockwise ( ) to increase the temperature, or counterclockwise ( ) to decrease the temperature.

4.Fold the insulation back in place and replace the access panel.

5.Turn “ON” the power supply.

FIGURE 7

198067-000, SGV 120 10TS, SGV 82 10TS specifications

State Industries has a rich history in the manufacturing of high-quality water heaters and heating equipment, and two of its notable products, the State Industries 198067-000, SGV 82 10TS, and SGV 120 10TS, exemplify the company's commitment to innovation and efficiency.

The State Industries 198067-000 is an exemplary water heater designed for both residential and light commercial applications. It features a powerful heating element that ensures a quick recovery rate, providing users with an ample supply of hot water. With a capacity designed to meet various demands, this model stands out for its efficient performance and durability. The use of high-quality materials in its construction helps in maintaining a longer lifespan while minimizing the risk of leaks or failures.

The SGV 82 10TS model is particularly engineered for industrial applications, featuring a robust design that meets the rigorous demands of commercial users. One of its most remarkable features is its high thermal efficiency, which significantly reduces energy consumption while ensuring a steady supply of hot water. This model is equipped with advanced insulation to minimize heat loss, thus enhancing its overall operational efficiency.

In terms of technology, the SGV 120 10TS incorporates an advanced control system that allows for precise management of water heating cycles. This not only improves energy savings but also maximizes the system's performance according to real-time demands. The incorporation of advanced sensors provides seamless monitoring of temperature and pressure, ensuring optimal safety and efficiency in operation.

Both models are designed with user-friendliness in mind, boasting easy installation and maintenance features. An accessible design means that routine checks and servicing can be performed without significant effort, leading to prolonged equipment life and reduced downtime. Furthermore, these water heaters are compliant with various industry standards, ensuring that they meet safety and performance regulations.

Overall, the State Industries 198067-000, SGV 82 10TS, and SGV 120 10TS embody cutting-edge technology and reliable performance, making them top choices for users seeking efficiency, durability, and ease of use in their water heating needs.