Memorex MCD4300BT operating instructions Receiving a Call

MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 15

BASIC OPERATION (CONTINUED)

RECEIVING A CALL

The last 30 incoming calls are saved in the Caller ID log.

1

12/14 10:25AM 17

JOHN SMITH 8001234567

2

Make sure that the Caller ID service is turned on by your phone company. When you receive a call, the display will show the name of the caller, number, time and date of the call.

To answer the call, press the TALK button. The display will show the amount of time you have been on the phone.

IMPORTANT:

•If the Caller ID stops operating properly, reset the telephone by simply unplugging it from the power source for five seconds, then plug it back in.

NOTES:

•If a call is received from an area which does not provide caller ID service, the display will show, “UNKNOWN”. If a call is received from outside the Caller ID area, the display will show, “OUT OF AREA”.

•If a call is received from a caller that has blocked his/her information, the display will show, “PRIVATE CALL”.

•When you receive a call, the unit will automatically set the time and date.

•The Caller ID memory can store up to 30 name/numbers.

•Calls picked up on the first ring will not be logged in the Caller ID log.

•Call Waiting calls are shown in the Caller ID log if you subscribe to the extra feature from the phone company that allows this.

•If several calls are received from the same number, all calls are recorded separately.

•If there are new calls, the display will show, “# NEW CALLS” and “# TOTAL NEW CALLS”. If there are no new calls, it will just show “# TOTAL CALLS”.

15