Memorex MCD4300BT operating instructions SET UP 3.RINGER 4.VOLUME

MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 27

ADVANCED FEATURES (CONTINUED)

ASSIGNING/CHANGING A HANDSET’S INTERNAL/INTERCOM (EXTENSION) NUMBER

The handset that comes with the unit is assigned number 1 at the factory. To assign or change the number of the additional handsets (if purchased), in order to take advantage of the additional features, simply follow the instructions below:

1.MEMORY

1 2.SET UP 3.RINGER 4.VOLUME

2 1 2

Press the MENU button; the Menu will appear in the display.

3 1 2

Using the CID JOG control ❶, scroll down to select “2. SET UP” and press the CID JOG control ❶, or simply press the “2” button ❷; the SET UP Menu will appear in the display.

4 1 AM

Using the CID JOG control ❶, scroll down to select “2. EXTENSION” and press the CID JOG control ❶, or simply press the “2” button ❷.

TO EDIT AN EXTENSION: Using key buttons (1-7), edit the extension number. The extension number will appear at the top left of the handset’s display.

NOTE:

•The main base phone is preset at the factory to number 1. You need to program any additional phones to a number other than one. If the base phone is accidentally changed from the 1 setting, simply follow the instructions above to set it back to 1.

SELECT BUTTON: The SEL button can be pressed to select functions instead of pressing the CID JOG control, use the one you feel more comfortable with.

CLEAR BUTTON: Press and hold the CLEAR button to go back to the Standby mode from any other mode.

27