Ingersoll-Rand PD30X-XXX-XXX-C, PE30X-XXX-XXX-C dimensions Trouble Shooting, Dimensional Data

TROUBLE SHOOTING
Product discharged from exhaust outlet.	Low output volume, erratic flow or no flow.
y Check for diaphragm rupture.	y Check air supply.
y Check tightness of (14) cap screw.	y Check for plugged outlet hose.
Air bubbles in product discharge.	y Check for kinked (restrictive) outlet material hose.
	y Check for kinked (restrictive) or collapsed inlet material hose.
y Check connections of suction plumbing.	y Check for pump cavitation - suction pipe should be sized at
y Check “O” rings between intake manifold and fluid caps.	least as large as the inlet thread diameter of the pump for
y Check tightness of (14) cap screw.	proper flow if high viscosity fluids are being pumped. Suction
Motor blows air or stalls.	hose must be a non-collapsing type, capable of pulling a high
	volume.
y Check (176) check valve for damage or wear.	y Check all joints on the inlet manifolds and suction connections.
y Check for restrictions in valve / exhaust.	These must be air tight.
	y Inspect the pump for solid objects lodged in the diaphragm
	chamber or the seat area.

DIMENSIONAL DATA

Dimensions shown are for reference only, they are displayed in inches and millimeters (mm).

Q (Bolt circle)	B
	B

N

D

D

3” A.N.S.I / DIN Flange (PX30X-FXX-XXX-C)

3 - 8 N.P.T.F. - 1 (PX30X-AXX-XXX-C)

Rp 3 (3 - 11 BSP parallel) (PX30X-BXX-XXX-C)

A F

L

Outlet

G

Air Inlet Ports 3/4 - 14 N.P.T.F. - 1

Inlet			H
K			J
	C		M
		Exhaust Port 1-1/2 - 11-1/2 N.P.T.

E

P

L

Q

Figure 4

			DIMENSIONS
A - see below		F	- 15” (381.0 mm)	K	- 9/16” (14.3 mm)
B	- 30” (762.0 mm)	G - see below		L	- see below
C	- 12-1/16” (306.4 mm)	H - 10-5/32” (258.0 mm)		M - 23-3/32” (586.3 mm)
D - see below		J	- see below	N - see below
E	- 17-11/16” (449.2 mm)

D o t t e d l i n e s s h o w optional 67263 muffler assembly.

P- 1” (25.4 mm) Q - 6” (152.4 mm)

	“A”	“D”	“J”	“N”	“L”	“G”
PX30X-XAX-XXX-C	23-5/8” (600.1 mm)	2-3/8” (60.3 mm)	11” (279.4 mm)	15-1/2” (393.7 mm)	2-3/4” (69.9 mm)	32” (812.8 mm)
PX30X-XCX-XXX-C	23-5/8” (600.1 mm)	2-7/16” (61.9 mm)	11-11/16” (296.9 mm)	15-1/2” (393.7 mm)	2-3/4” (69.9 mm)	32” (812.8 mm)
PX30X-XHX-XXX-C	23-1/8” (587.4 mm)	2-3/4” (69.9 mm)	11-11/16” (296.9 mm)	16” (406.4 mm)	2-3/4” (69.9 mm)	32” (812.8 mm)
PX30X-XSX-XXX-C	23-1/8” (587.4 mm)	2-3/4” (69.9 mm)	11-11/16” (296.9 mm)	16” (406.4 mm)	2-3/4” (69.9 mm)	32” (812.8 mm)
PX30X-FXX-XXX-C	23-1/8” (587.4 mm)	2-3/4” (69.9 mm)	11-11/16” (296.9 mm)	16” (406.4 mm)	3-3/4” (95.25 mm)	33-3/4” (857.3 mm)

PN 97999-1110

Page 8 of 8 PD30X-XXX-XXX-C (en)