White 834DW manual Looper threading

(D)

(C)

(B)

(A)

Fig. A

Fig. B

(2) Upper		looper threading			(8)
Bring the		upper looper to		its	lowest position by
turning	handwheel		toward	you.
Draw thread from spool and				pass		it, through guide
c of the thread stand and then,						in orde through
guides	©	©.(Fig.	A)

While	pressing down the tension release				lever with
your right		hand,	lay	thread between thread tension
discs	with	your	left	hand. (Fig. B)

Thread the hole of upper looper			0 using tweezers.
Cut the thread	leaving	about	10cm (4”) of spare
thread.(Fig. C)
Close the front	cover.

—8—