5.ADJUSTING BALANCE OF STITCH
WIDTH AND CUTTING WIDTH
Adjust the cutting width from 5.2(0.2”) to 7.0mm (0.28”) according to the kind of material.
The standard cutting width is 5.5mm (0.21”). Open the front cover to adjust the cutting width.
(1)If the cutting width is narrower than the stitch width, leaving loops off the fabric edge, turn the cutting width adjusting dial to the direction of arrow. (To a bigger number)
(2)If the cutting width is wider than the stitch width, causing a pucker within the overlock seam,turn the cutting width adjusting dial to the direction of the arrow. (To a smaller number)
6. STITCH LENGTH ADJUSTMENT
The machine is
stuch length from 1mm (Narrow rolled edge) to 5mm by
+For normal overlock set the stitch length from 2.5mm to 5mm. A stitch length less than 2.5mm is used only for rolled edge.
4
4
/
I
Stitch length dial