White 834DW manual Tucks, Design, Remove the left or right Needle, Over lock Advance, See P.11

Page 30

13.

TUCKS

Pin tucks are overlocked on Use the cutter as a guide but

the

edge.

do not cut your fabric.

Pin tucking is suited clothing and a lady’s

to the	design

blouse.

of a child’s

for your

desired pintuck width. (Sew only with the one needle.)

Raise

the

foot lifter.

(2)The tension is set for normal (See P12)

Mark and

press

pin tucks in

The differential feed ratio is normally “N”.

(3)

plate and start to sew.

Make chain-stitch at the end of the sewing.

(4)The tuck is ironed to one side when your Dewing 5 finished

—25—

Image 30

Contents UC mDr00 Rear of arm FitThis appliance Future referenceOpen ?erate whereNeedles NeedleArea, such as Contents Presser foot 9DfferentialfeeddialParts PresserRaise presser foot Operation and Function of PartsDisengaging For easeFor SEW!NG ConnectingPower Cord Same asSetting Telescopic Thread Stand Changing ThreadsTie threads Replacing Needle NeededSame Threading ThreadingPass Looper threading Guide Preparation for Sewing and CheckingBefore SettingBeginning FabricSewing Thr EryFoot PreSsureTension Chart ThreadUnbalanced Upper Thread Tension AdjustmentTension Thread WrapsBC 0z hi Stitch Length Adjustment IndicatorAdjusting Balance of Stitch Width and Cutting WidthMa riols ‘oven IcrErsPy 07NCorded RoughNrrow CordedSewing for Curved Seams Three Thread Overlock Stitch Using I Needle Needle By removing the left needleOverlock Using NeedleConversion To 2-Thread Thread Overlock StitchStitch SelecUon 1111Thread 0FJ Thread RolledRolled Edge + Adjust as needed according to the kind Uiread Rofled EdgeFabric and the threads. See. P.29 Remove the left or right Needle TucksDesign Over lock AdvanceScrewj Changing Light BulbLubrication Servicing StoragePlease AddressedTieezers Brush AccessoryLcaning SheathThick material Poluesterspun, filamentTable of Sewing MATERIALS, Needles and Threads Crepe GeorgetteProblem SQiLEMSolving SPECIF!CA11ONS NeedlesSpeed