SECTION 2. PREPARE THE MACHINE FOR SEWING
Wind the Bobbin (Continued)
J
Draw thread from spool through Pull end of thread through hole in Place bobbin onto bobbin winding
bobbin winding tension disc as shown. bobbin as shown.spindle with end of thread coming from the top of the bobbin. Push bobbin winding spindle to the right until it clicks. Holding onto end of thread, start machine, When bobbin is slightly filled, snip off end of thread.
Insert the Bobbin into the Bol bin Case
Wind thread until winder stops.
Push bobbin winding spindle to the left and clip thread. Remove bobbin. Turn clutch knob away from you while holding hand wheel for normal sewing operation.
Place bobbin in bobbin case Pull thread through slot of making sure thread feeds clock- as shown,
wise and is coming from bobbin as shown,
case Pull thread under tension spring and through the opening as shown above. Pull 3 to4 inches of thread from bobbin.
Holding latch open, position Case should lock into place case into shuttle and release when latch is released.
latch.
10