SECTION 5. | CARE FOR THE | MACHINE |
|
|
|
| |
Replacing the | Light Bulb | Cleaning the Machine |
|
| |||
|
| To insure that your machine operates at its best, you need to keep the essential parts clean at all times. | |||||
|
| The feed dogs and shuttle race areas can attract dust and lint. Your machine can become sluggish or knock loudly if a thread | |||||
|
| is caught. |
|
|
|
| |
|
| Check | and | clean those | areas | about | every three months under normal use. |
|
| If you | sew | frequently, | clean | more | often. |
T T
1.Unplug the machine and open the face cover.
CAUTION! The light bulb could be
HOT. Protect your
fingers when you handle it.
2.Push the bulb up and turn the bulb counter*clockwise to remove it,
3.Put the new bulb in by pushing it up and turning it clockwise.
Clean the Feed Dogs
Follow these | directions: |
|
|
| |
1, | Unplug | the machine. | Remove | 2. Use a lint brush to clean the feed | 3. Replace needle plate. |
| presser foot and needte. |
| dogs. |
| |
| Using a screw driver, remove |
|
| ||
| needle plate. |
|
|
|
38