SECTION 2. PREPARE THE MACHINE FOR SEWING
Pick Up the Bobbin Thread
!
1. Raise | presser | foot | lever. | Hold top | 2. Bring bobbin thread up by pulling | 3. | Pull | both | threads under and to the |
thread | loosely | in left hand | and rotate | top thread. |
| back | of | the presser foot, leaving 4 | |
handwheel toward | you one | complete |
|
| to 6 inches of thread clear. | ||||
turn. |
|
|
|
|
|
|
|
|
|
If you cannot pick up bobbin thread by following steps given above, then check:
1.Is needle threaded from front to back?
2.Is thread tangled around needle?
3.Are 3 to 4 inches of thread coming from the shuttle?
4.Is thread from shuttle tangled?
5.Is bobbin properly installed in the bobbin case?
6.Is the machine threaded according to the instructions?
12