Pfaff 360 manual Numbers I to, Or packs them more closely to

R 7999

If you want to sew a few wide zigzag stitches while the machine is set for straight stitching (A on 0), merely press down the finger-tipcontrol. When the lever is

released, the machine resumes straight stitching automatically.

To sew longer zigzag seams, turn dial A to desired stitch width (indicated by

numbers I to 4).

When dial A is set between 1/2 and 2, you can double the stitch width by depress ing the finger-tipcontrol (important for buttonholing and fancy stitching).

When you push the control up, the machine will sew straight, regardless of the

stitch width set (ideal for tying off zigzag seams).

Lever B changes the position of the needle in the needle plate slot. Thus the stitch ing can be moved from the center to the left or right of the slot, as desired.

The position of lever B (left, center, right) mdi cafes the position of the needle in the needle plate slot.

Dial G lengthens zigzag stitches

or packs them more closely to

gether (satin stitch).

cp cip

7R7995