Multiquip MC3SBA (B&S), MC3SEA, MC3PBA (B&S), MC3PEA specification

MIX N' GO MIXER — INITIAL START-UP (ELECTRIC MOTOR)

Initial Start-up Instructions (Electric Motor)

Starting

CAUTION:

DO NOT attempt to operate the mixer until the Safety, General Information and Inspection sections have been read and understood.

1.Before starting, make sure mixer is positioned on a secure flat surface to prevent tipping.

2.Use an extension cord (see Table 5) of adequate current carryingcapacity,insert theelectricmotor'spowerplug into one end of the extension cord.

3.NEVER! use a worn or frayed extension cord.

4.NEVER! operate mixer withV-belt cover removed.

Table 5. Extension Cord Size

No. 12 Wire	No. 10 Wire	No. 8 Wire	No. 6 Wire

50 (feet)	75 (feet)	100 (feet)	200 (feet)
(15.24 meters)	(22.86 meters	(30.48 meters	(60.96 meters

5.Plug the other end of the extension cord into a 120 VAC G.F.C.I.protected receptacle. Rememberthepowerrequire- ments for this electric motor is 120 VAC, 60 Hz. The use of any other input voltage will severely damage the motor.

WARNING:

ALWAYS read the label on the electric motor before applying power. The label will indicate the proper power requirements for the motor. Remember the use of any other input voltage will severely damage the motor.

WARNING:

To prevent tripping (Figure 18) of both the mixer and personnel, position the extension cord so that it lays flat and is not curled underneath the mixer.

DANGER

NEVER! touch the power cord (Figure 17) with wet hands or while standing in water when it is connected to a power source.The possibly exists of electrical shock (electrocution) even death. NEVER! spray

water directly on the electric motor.

WET

HANDS

POWER

CORD

(POWER ON)

Figure 17. Extension Cord (Wet Hands)

Figure 18. Mixer (Tripping)

6.The drum should be rotating allowing the mixing process to begin. Use a shovel (Figure 19) to place the cement mix inside the drum, add water as required. Be careful to only placethetipoftheshovelinsidethedrum.Placingtheshovel all the way inside the drum will cause the shovel to strike the blades. Thisconditionwillmaketheshovelrotate,andcould cause injury to personnel.

Figure 19. Mixing Drum (Placing Cement Mix)

6.SeeTable3formixinghints.NEVER!place hands inside the drum while the drum is rotating.

PAGE 22 —MIX N' GO MIXER — OPERATION AND PARTS MANUAL — REV. #3 (09/20/11)

MC3PEA, MC3PBA (B&S), MC3SBA (B&S), MC3SEA specifications

The Multiquip MC3 series is a line of high-performance concrete power trowels, especially designed to improve surface finishing, enhancing both efficiency and quality in various construction projects. The MC3SEA, MC3SBA (B&S), MC3PBA (B&S), and MC3PEA models offer advanced technologies and features that cater to the needs of different applications.

One of the standout features of the MC3 series is its robust construction. Each model is built with a heavy-duty steel frame, ensuring durability and longevity in demanding environments. The trowels are engineered to withstand rigorous use while providing excellent stability during operation, which is critical for achieving a smooth finish on concrete surfaces.

Powering these machines are reliable engine options, with the B&S (Briggs & Stratton) engines integrated into the MC3SBA and MC3PBA models. These engines are known for their fuel efficiency and ease of maintenance, making them an optimal choice for contractors seeking reliable performance. The MC3SEA and MC3PEA models offer alternative engine configurations tailored for specific applications, providing contractors with choices that best suit their work demands.

The torque capabilities of the MC3 series are impressive, allowing for effective power transfer to the trowel blades. This results in a thorough finishing process, enhancing the evenness of concrete surfaces. The trowels come with various blade options, including both standard and extended blades, enabling operators to customize their equipment based on job requirements.

The ergonomics of the MC3 series have been designed with user comfort in mind. Equipped with padded handles and adjustable operating positions, operators can work for extended periods without experiencing fatigue. The intuitive control layout enhances maneuverability, allowing for precise handling in tight spaces.

Another key characteristic of the MC3 series is its easy maintenance. With accessible engine compartments and straightforward service points, routine maintenance tasks can be performed with minimal downtime, ensuring that contractors can keep their projects on schedule.

In summary, the Multiquip MC3SEA, MC3SBA (B&S), MC3PBA (B&S), and MC3PEA power trowels represent a blend of power, durability, and user-friendliness. Their robust construction, versatile engine options, ergonomic design, and easy maintenance make them ideal choices for concrete finishing tasks, providing contractors with the reliability and performance needed to achieve high-quality results on the job site.