Multiquip MC3PBA (B&S), MC3SEA, MC3PEA Before Starting, Engine Oil Check, Fuel Check, Belt Check

Page 21

MIX N' GO MIXER — PRE-INSPECTION (GASOLINE ENGINE)

CAUTION

NEVER operate the mixer in a confined area or enclosed area structure that does not provide ample free flow of air.

ALWAYS wear approved eye and hearing protection before operating the mixer.

NEVER place hands inside drum while the engine is running.ALWAYS shut the engine down before performing any kind of maintenance service on the mixer.

Before Starting

1.Read safety instructions at the beginning of manual.

2.Clean the mixer, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner.

3.Insertandremovethedipstickwithoutscrewingitintothefiller neck. Check the oil level shown on the dipstick.

4.If the oil level is low (Figure 16), fill to the edge of the oil filler hole with the recommended oil type (Table 4).Maximum oil capacity is 0.48 quarts (.45 liters)

Figure 16. Engine Oil Dipstick (Oil Level)

Table 4. Oil Type

Season

Temperature

Oil Type

 

 

 

Summer

25°C or Higher

SAE 10W-30

 

 

 

Spring/Fall

25°C~10°C

SAE 10W-30/20

 

 

 

Winter

0°C or Lower

SAE 10W-10

 

 

 

3.Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required.

4.Check carburetor for external dirt and dust. Clean with dry compressed air.

5.Check fastening nuts and bolts for tightness.

Explosive Fuel

Engine Oil Check

1.To check the engine oil level, place the mixer on secure level ground with the engine stopped.

2.Remove the filler dipstick from the engine oil filler hole (Figure 15) and wipe clean.

Fuel Check

Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the mixer if the engine is hot! or running.

1.Remove the gasoline cap located on top of fuel tank.

2.Visuallyinspecttoseeiffuellevelislow. Iffuelislow,replenish with unleaded fuel.

3.When refueling, be sure to use a strainer for filtration. DO NOT top-off fuel. Wipe up any spilled fuel.

V-Belt Check

A worn or damaged V-belt can adversely affect the performance of the mixer.If a V-belt is defective or worn simply replace the V- belt as outlined in the maintenance section of this manual.

Figure 15. Engine Oil Dipstick (Removal)

MIX N' GO MIXER — OPERATION AND PARTS MANUAL — REV. #3 (09/20/11) — PAGE 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents MIX N GO Proposition 65WARNING Silicosis Warning SILICOSIS/RESPIRATORWARNINGSTable of Contents Parts Ordering Procedures Best Deal! Order via Internet Dealers OnlyOrder via Fax Dealers Only Safety Messages Safety InformationGeneral Safety Mixer Safety Fuel Safety Gasoline Models only Transporting Safety Machine Safety Decals Operation and Safety DecalsAdvertencia Avertissement Operation and Safety DecalsDimensions L x W x H MIX N GO Mixer SpecificationsDry Net Weight ModelMIX N GO Mixer Dimensions Mixer MIX N GO Mixer Dimensions Electric Motor MIX N GO Mixer General Information Mixer Components MIX N GO Mixer Mixer ComponentsEngine Controls and Components MIX N GO Mixer Basic EnginePacking Container AssemblyMIX N GO Mixer Assembly Instructions Engine Oil Check Before StartingFuel Check Belt CheckInitial Start-up Instructions Electric Motor Starting MIX N GO Mixer Initial START-UP Electric MotorEngine Choke Lever Closed Starting the Engine Briggs & StrattonStopping The Engine MIX N GO Mixer Initial START-UP Gasoline EngineMaintenance Gearbox Oil Check MIX N GO Mixer MaintenanceEngine Maintenance Schedule MIX N GO Mixer Maintenance Gasoline EngineSpark Plug Gap Engine Air CleanerMIX N GO Mixer Preparation for Long -TERM Storage MIX N GO Mixer Operation and Parts Manual REV. #3 09/20/11 Engine Troubleshooting MIX N GO Mixer Troubleshooting EngineMIX N GO Mixer Troubleshooting ENGINE/MIXER QTY. Column MIX N GO Mixer Explanation of Code in Remarks ColumnTo 3 Units MIX N GO Mixer Suggested Spare PartsName Plate and Decals MIX N GO Mixer Name Plate and DecalsDecalwarning MQ 26B Remarks MIX N GO Mixer Mixer ASSY. Steel Drum26B Part Name QTY Remarks MIX N GO Mixer Mixer ASSY. Plastic Drum Belt Guard MIX N GO Mixer Mixer ASSY. Plastic Drum Plastic Barrel Freight Policy Terms and Conditions of Sale PartsMIX N GO Mixer Operation and Parts Manual REV. #3 09/20/11 HERE’S HOW to GET Help

MC3PEA, MC3PBA (B&S), MC3SBA (B&S), MC3SEA specifications

The Multiquip MC3 series is a line of high-performance concrete power trowels, especially designed to improve surface finishing, enhancing both efficiency and quality in various construction projects. The MC3SEA, MC3SBA (B&S), MC3PBA (B&S), and MC3PEA models offer advanced technologies and features that cater to the needs of different applications.

One of the standout features of the MC3 series is its robust construction. Each model is built with a heavy-duty steel frame, ensuring durability and longevity in demanding environments. The trowels are engineered to withstand rigorous use while providing excellent stability during operation, which is critical for achieving a smooth finish on concrete surfaces.

Powering these machines are reliable engine options, with the B&S (Briggs & Stratton) engines integrated into the MC3SBA and MC3PBA models. These engines are known for their fuel efficiency and ease of maintenance, making them an optimal choice for contractors seeking reliable performance. The MC3SEA and MC3PEA models offer alternative engine configurations tailored for specific applications, providing contractors with choices that best suit their work demands.

The torque capabilities of the MC3 series are impressive, allowing for effective power transfer to the trowel blades. This results in a thorough finishing process, enhancing the evenness of concrete surfaces. The trowels come with various blade options, including both standard and extended blades, enabling operators to customize their equipment based on job requirements.

The ergonomics of the MC3 series have been designed with user comfort in mind. Equipped with padded handles and adjustable operating positions, operators can work for extended periods without experiencing fatigue. The intuitive control layout enhances maneuverability, allowing for precise handling in tight spaces.

Another key characteristic of the MC3 series is its easy maintenance. With accessible engine compartments and straightforward service points, routine maintenance tasks can be performed with minimal downtime, ensuring that contractors can keep their projects on schedule.

In summary, the Multiquip MC3SEA, MC3SBA (B&S), MC3PBA (B&S), and MC3PEA power trowels represent a blend of power, durability, and user-friendliness. Their robust construction, versatile engine options, ergonomic design, and easy maintenance make them ideal choices for concrete finishing tasks, providing contractors with the reliability and performance needed to achieve high-quality results on the job site.
Top Page Image Contents