About This Guide, Keyboard Shortcuts, Hotkeys

1 About This Guide

This documentation presents step-by-step directions to run the Windows CE Thin Client. For your convenience there are a few remarks about handling the dialog boxes:

The dialog boxes are equipped with the buttons OK and ☒ in the upper right corner. To apply / save modifications you have to click OK. Alternatively press ENTER which both saves the modifications and closes the dialog at the same time. Click on ☒ only or press ESC to close the dialog without modifications to apply.

1.1 Keyboard Shortcuts

In general, the Windows keyboard shortcuts can be used, such as:

CTRL+TAB	Move forward through tabs.
CTRL+SHIFT+TAB	Move backward through tabs.
SPACEBAR	Select or clear the check box if the active option is a check box.
ENTER	Carry out the command for the active option or button, alternative for the
	click on OK and ☒.
ESC	Cancel the current task rsp. close the dialog box without saving
	modifications.

1.2 Hotkeys

The Task hotkey enables you to switch between currently open applications or “tasks”.

CTRL + ALT + : Left selection in the Applications bar

CTRL + ALT + : Right selection in the Applications bar

The terminal password authorization hotkey re-enables disabled settings.

CTRL + ALT + Pos1 (HOME)

The terminal password has to be entered.

To show the Starter window (Terminal Connection Manager) on top of other windows:

CTRL + ALT + End

Holding the Shift key during boot, the device starts in VGA mode.

User's Guide for A2xx with WinCe

Build # 5