Interior Seal, Exterior Seal | Pella 80YV0102 instruction

S.Fasten the window in the opening by driving the 2-1/2" long screws through each pre- drilled hole in the window frame, through the shims and into the rough opening.

Note: Single-hung: Raise the lower sash to access lower installation holes. Double-

hung: Lower the top sash to access the upper installation holes and raise the lower sash to access the lower installation holes. Tilt the lower sash to the interior to access the installation holes at the checkrail. Assistance from the interior is recommended for this step.

5 INTERIOR SEAL

Caution: Ensure use of low pressure polyurethane window and door insulating foams and strictly follow the foam manufacturer’s recommendations for application. Use of high pressure foams or improper application of the foam may cause the window frame to bow and hinder operation.

A.Apply insulating foam sealant. From the interior, insert the nozzle of the applicator approximately 1" deep into the space between the window and the rough opening and apply a 1" deep bead of foam. This will allow room for expansion of the foam and will minimize squeeze out. Apply sealant across interior surface of shims

to create a continuous seal. For windows with jamb extensions installed, ensure the foam is placed between the window frame and the rough opening, not between the jamb extension and the rough opening. Follow foam manufacturer's instructions.

Note: It may be necessary to squeeze the end of the tube with pliers to be able to insert into the space between the window frame and the rough opening.

SINGLE-

HUNG

and

DOUBLE-

HUNG

B.Check the window operation (vent units only) by opening and closing the window.

Note: If the window does not operate correctly, check to make sure it is still plumb, level, square, and the jambs are not bowed. If adjustments are required, remove the foam with a serrated knife. Adjust the shims and reapply the insulating foam sealant.

5C	Installation
5C	screw
	hole
	Jamb plug

C.Insert jamb hole plugs (provided) into each screw hole for single-hung and double-hung units.

Interior Finish or Trim:

The space between the new window and the existing window’s frame will need to be covered

with trim. There are many ways to accomplish this and each case can be unique. How this is

done will be the decision of the homeowner or window installer. A few possibilities include using cove, quarter round, or a stop moulding.

6 EXTERIOR SEAL

A. Insert backer rod into the space around the window at the head and

jambs. This should provide at least

3/8" clearance between the backer rod

and the exterior face of the window.

Note: Backer rod adds shape and	6B
Note: Backer rod adds shape and
depth for the sealant line.
B. Place a bead of sealant at the jambs
and head between the existing
window frame and the replacement
window frame.

80YV0102 specifications

The Pella 80YV0102 is a state-of-the-art window solution that exemplifies innovation and quality in home design and energy efficiency. Known for its durability and performance, this window model is part of Pella's well-respected line, catering to both aesthetic and practical needs of homeowners.

One of the main features of the Pella 80YV0102 is its stunning design versatility. Available in a range of styles and finishes, this window can seamlessly integrate into various architectural designs, whether traditional or contemporary. Homeowners can choose from a variety of frame colors, grille patterns, and sizes, allowing for a customized look that enhances the overall curb appeal of their property.

Energy efficiency is another standout characteristic of the Pella 80YV0102. The window is engineered with advanced glass technologies, such as Low-E insulation, which helps to minimize heat transfer. This not only contributes to a more comfortable indoor environment throughout the seasons but also reduces energy costs. The window’s high-performance rating ensures that it meets rigorous energy efficiency standards, making it an ideal choice for those looking to lower their carbon footprint.

The Pella 80YV0102 also boasts exceptional durability. Constructed from high-quality materials, it is built to withstand the elements, whether it be harsh sunlight, extreme temperatures, or heavy rainfall. This resilience translates to a long lifespan, which means homeowners can enjoy the benefits of this investment for many years without worrying about maintenance or replacement.

Installation is another key consideration, and the Pella 80YV0102 offers an easier process with its precise manufacturing and adjustable frame designs. Homeowners and contractors alike appreciate this feature as it saves time and effort during the installation process.

In addition to its features, the Pella 80YV0102 prioritizes security. The window includes advanced locking mechanisms and reinforced frames, ensuring peace of mind for homeowners concerned about safety and burglaries.

Overall, the Pella 80YV0102 stands out as a premier window solution through its blend of style, energy efficiency, durability, and security features. This model continues to evolve with the latest technology, making it a top choice for homeowners looking to enhance their living spaces.