Pella 80YV0102 warranty TWO or More People are Required for the Following Steps

Page 5

AWNING/

CASEMENT

C.Remove Interior Frame Cover #2.

The cover on vent units where the crank handle and roto-cover will be located.

For Standard Awning, single units greater than 42" in height and multiple window combinations.

1.Starting at the cover end closest to where the crank handle will be located, insert the tool between the sash and cover (using the same method of insertion used for Interior

Frame Cover #1).

Note: Insert the tool under Interior Frame Cover #2 next to the FRAME CORNER (C2).

C2

C3

2.Pull the tool away from the frame to start releasing the cover barbs from the frame kerfs.

3.When the cover begins to pull away from the frame, relocate the tool near the end of the cover as shown and continue to pull up to release the barbs from the kerfs.

4.When the cover has been released near the crank handle cut-out, reposition the tool with the hook under the front edge of the cover. Slide the tool over while pulling up on the cover. Continue along the length of the cover until it is removed.

Note: Take note of the cover support bracket around the roto operator hardware, (on the sill of casement and large awning units and on the jamb of standard awning units) as the cover support bracket will be referenced when re-installing Interior Frame Cover #2.

C4

C4 NOTE

Cover support bracket

D.Remove Interior Frame Cover #3.

The cover on vent units on the opposite frame side from where the crank handle is located.

For Standard Awning greater than 42" in width, single units greater than 42" in height and multiple window combinations.

1.Start at one end of the cover and insert the tool between the frame and cover as shown.

2.Pull the tool away from the frame to start releasing the cover barbs from the frame kerfs.

3.When the cover begins to pull away from the frame, grasp the cover and continue to pull to release the barbs from the kerfs, removing the cover.

D1

TWO OR MORE PEOPLE ARE REQUIRED FOR THE FOLLOWING STEPS

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Window Replacement Instructions for Opening Preparation Remove the Existing SashWindow Preparation Awning and Casement only Lock handle slot TWO or More People are Required for the Following Steps 4A Note Setting and Fastening the WindowShim and Fastener Placement Guide High Combination Cover SINGLE-HUNG and DOUBLE-HUNG Exterior Seal Interior SealExterior Finish of Existing Frame Finish Lock Lever Removal and InsertionFinish Care and Maintenance Important Notice

80YV0102 specifications

The Pella 80YV0102 is a state-of-the-art window solution that exemplifies innovation and quality in home design and energy efficiency. Known for its durability and performance, this window model is part of Pella's well-respected line, catering to both aesthetic and practical needs of homeowners.

One of the main features of the Pella 80YV0102 is its stunning design versatility. Available in a range of styles and finishes, this window can seamlessly integrate into various architectural designs, whether traditional or contemporary. Homeowners can choose from a variety of frame colors, grille patterns, and sizes, allowing for a customized look that enhances the overall curb appeal of their property.

Energy efficiency is another standout characteristic of the Pella 80YV0102. The window is engineered with advanced glass technologies, such as Low-E insulation, which helps to minimize heat transfer. This not only contributes to a more comfortable indoor environment throughout the seasons but also reduces energy costs. The window’s high-performance rating ensures that it meets rigorous energy efficiency standards, making it an ideal choice for those looking to lower their carbon footprint.

The Pella 80YV0102 also boasts exceptional durability. Constructed from high-quality materials, it is built to withstand the elements, whether it be harsh sunlight, extreme temperatures, or heavy rainfall. This resilience translates to a long lifespan, which means homeowners can enjoy the benefits of this investment for many years without worrying about maintenance or replacement.

Installation is another key consideration, and the Pella 80YV0102 offers an easier process with its precise manufacturing and adjustable frame designs. Homeowners and contractors alike appreciate this feature as it saves time and effort during the installation process.

In addition to its features, the Pella 80YV0102 prioritizes security. The window includes advanced locking mechanisms and reinforced frames, ensuring peace of mind for homeowners concerned about safety and burglaries.

Overall, the Pella 80YV0102 stands out as a premier window solution through its blend of style, energy efficiency, durability, and security features. This model continues to evolve with the latest technology, making it a top choice for homeowners looking to enhance their living spaces.
Top Page Image Contents