Pella 80ED0101 Rough Opening Preparation, Verify the opening is plumb and level

Page 2

YOU WILL NEED TO SUPPLY:

ss#EDAREOR )MPERVIOUSOSHIMSSPACERSMTO  ss GALVANIZED ROOlNGlNAILS  LB

ssX CORROSIONIRESISTANT mAT HEAD WOOD SCREWS OR equivalent screws for concrete applications

ss#LOSED CELLEFOAM BACKERLRODSEALANT BACKERN TO CFT

ss0ELLA® SmartFlash™ foil backed butyl window and door flashing tape or equivalent

ss(IGHGQUALITYUEXTERIOR GRADE POLYURETHANE ORNSILICONE

sealant (1 tube per window)

SEALANT

ss'REATA3TUFF ™ Window and Door Insulating Foam Sealant by the Dow Chemical Company or equivalent low pressure polyurethane window and door foam

-DO NOT use high pressure or latex foams ss)NTERIORRTRIM ANDORRJAMB EXTENSIONSO TO MFT

INSTALLATION CLIP OPTION:

ss OR )NSTALLATIONLCLIP

ss X XCORROSIONIRESISTANT mAT HEAD WOOD SCREW ss X  CORROSIONIRESISTANT mAT HEAD OR  X

1-1/2" masonry screws for concrete block applications

TOOLS REQUIRED: ss4APEPMEASURE ss,EVEL ss3QUARE ss(AMMER ss3TAPLER ss3EALANT GUN ss3CISSORS ORSUTILITY KNIFE ss3TIFF PUTTY KNIFE ss0HILLIPSLSCREWDRIVER ss$RILL ss$RILL BITS  AND 

REMEMBER TO USE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.

1 ROUGH OPENING PREPARATION

A. Verify the opening is plumb and level.

Interior

Note: It is critical that the bottom is level.

 

B. Verify the window will fit the opening.

1A

 

Measure all four sides of the opening to make sure it is 1/2" larger than the window in both width and height. On larger openings measure the width and height in several places to ensure the header or studs are not bowed.

Note: 1-1/2" or more of solid wood blocking is required around the perimeter of the opening. Fix any problems with the rough opening before proceeding.

Interior

1B

C.Cut the water resistive barrier (1C).

D.Fold the water resistive barrier (1D). Fold side flaps into the opening and staple to inside wall. Fold top flap up and temporarily fasten with flashing tape.

Water Resistive Barrier

1st cut

3rd cut

1C

2nd

cut

4th cut:

Make a 6" cut up from each top corner at a 45°

angle to allow the water resistive barrier to be lapped over the fin at the head of the window.

Exterior

1D

E.Apply sill flashing tape #1. Cut a piece of flashing tape 12" longer than the opening width. Apply at the bottom of the opening as shown (1E) so it overhangs 1" to the exterior.

Note: The tape is cut 12" longer than the width so that it will extend 6" up each side of the opening.

F.Tab the sill flashing tape and fold. Cut 1" wide tabs at each corner (1/2" from each side of corner) (1F). Fold tape to the exterior and press firmly to adhere it to the water resistive barrier.

1"

1E

6"

1/2"

1/2"

1F

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Important Safety Information Instrucciones en español en el reversoVerify the window will fit the opening Rough Opening PreparationVerify the opening is plumb and level Insert the window from the exterior of the building. Place Setting the WindowPrepare the Window Installation Clip Method Plumb and square windowSimulated-hung only Placement of the frame screwsFrame Screw Method From the room side of the window, DRILLI DIAMETER Reinstall the clad/wood insert and sashesIntegrating the Window to Water Resistive Barrier Apply flashing tape to diagonal cuts. Cut pieces Interior SealSealing the Window to the Exterior Wall Cladding fin to the interior face of the openingApply a bead of high quality exterior grade sealant to Shape, tool and clean excess sealant. When finished,Sealant line Capable of expanding and contracting

80ED0101 specifications

The Pella 80ED0101 is a remarkable door model that exemplifies Pella's commitment to quality, innovation, and aesthetic appeal. Specifically designed for both residential and commercial applications, this door is intrinsic to enhancing the overall functionality and appearance of an entryway.

One of the standout features of the Pella 80ED0101 is its robust construction. The door is engineered with a sturdy fiberglass exterior, making it highly resistant to warping, cracking, and splitting. This not only results in longevity but also ensures low maintenance over the years, as fiberglass can withstand extreme weather conditions without significant deterioration.

In terms of energy efficiency, the Pella 80ED0101 excels in providing superior insulation. The door includes a core of high-density polyurethane foam, which significantly reduces thermal transfer, keeping interiors comfortable in both hot and cold climates. Furthermore, the door is equipped with double or triple-pane insulated glass options that reduce energy consumption, making the Pella 80ED0101 an environmentally-friendly choice.

Appearance plays a crucial role in entryway selection, and the Pella 80ED0101 does not disappoint. Available in customizable options, homeowners can choose from a variety of finishes, colors, and sizes to fit their specific aesthetic preferences. The door's sleek design can seamlessly blend with various architectural styles, enhancing curb appeal and property value.

Security is also a priority with the Pella 80ED0101. It features an advanced locking system that provides enhanced security against forced entry, making it ideal for protecting homes and businesses. The lock system works in conjunction with a heavy-duty frame and reinforced hinges, ensuring a secure fit in the doorframe.

Moreover, the Pella 80ED0101 is equipped with innovative technologies such as the Easy-Glide roller system for smooth operation in sliding doors and the SmartKey security feature for convenient re-keying of locks.

In summary, the Pella 80ED0101 is a multifaceted door option that combines durability, energy efficiency, aesthetic appeal, and security. Its advanced design and technology cater to the modern homeowner, offering peace of mind and style in one package. With its impressive characteristics, the Pella 80ED0101 stands out as a top choice for anyone looking to enhance their entryways.
Top Page Image Contents