Cutting Rail Ends, Assembly | Grizzly C1555, C1550, 1554, 1551, C1552

Step 2: Cutting Rail Ends

Fence

Unplug the router and change bits. Raise the router bit so the top of the bead is

Outer Side

1Ú16" below the top of your stock as shown in Figure B. Make sure that the miter

gauge used passes closely enough to the router bit to give the workpiece

proper support. It is recommended an extension be applied to the miter with

screws, if the miter is more than an inch from the bit. See Figure C. Make

1Ú16''

sure that miter and face have working clearance so they wonÕt come in con-

tact with bit. The miter gauge should also be checked for squareness to the

miter slot and adjusted, if necessary. The fence should be moved away so

the workpiece does not touch it during the cutting procedure. Run a test

Router Table

piece which is the same thickness as your actual rail stock. Test fit the rail to

a finished stile to see how the joint looks. If the pieces do not fit together tightly,

Figure B

or if the front and back surfaces do not fit flush, it may be necessary to readjust. Make very small movements in the height of the router bit and test cut again.

When the fit is properly adjusted, make the end cuts on the rails. Double check the fit occasionally, to insure accuracy. The workpiece must always be fed against the cutter rotation and the full depth of profile should be made in one pass to ensure a precise cut. Rotate the board end for end, maintaining the face-down position and cut the other end. A clamping device may be nec- essary to keep the workpiece secured against the miter gauge.

Fence Moved

Away from Cutter

The position of the profile on the workpiece and variance in material thick- ness will also affect alignment. It is therefore very important that test mate- rial is milled to the same thickness as the finished material to ensure an

accurate setup.	Figure C	Miter
		Miter
		Extension
		Extension
Step 3: Assembly

The illustrations below show the typical style, rail and glass layout. Note the glazerÕs points which secure the pane on the back side of the frame. They can be obtained from your local hardware store along with the putty needed to finish and seal window.

Doors having more intricate designs such as arched, tombstone or curved panels should only be done when you are confident of your ability. If your project requires curved pieces then freehand routing using the bearing and starter pin will be necessary.

Remember that it is important to work with good quality material and to insure that all pieces are machined the same and that all ends and edges are cut square. Follow all recommended

safety procedures and always test the setup using sample pieces.

	Gap				Glass Pane

Glazer's Putty

Point

529003622

1553, C1552, 1551, 1554, C1550 specifications

The Grizzly C1552, C1554, C1555, C1553, and C1550 are part of a versatile range of crushing and screening machines designed to meet the demands of various industries, including mining, construction, and recycling. Each model is engineered with specific features that enhance performance, reliability, and efficiency, making them suitable for a wide array of applications.

The Grizzly C1552 is recognized for its robust design and high throughput capability. It is equipped with a powerful engine that provides exceptional crushing force, ensuring effective material processing. Its advanced hydraulic system allows for rapid adjustments, optimizing the crushing process for different sizes and types of material. The C1552 also features a user-friendly control system, enabling operators to monitor performance metrics in real time.

The C1554 model offers enhanced mobility, equipped with tracks for easy relocation across job sites. This model combines flexibility with performance, allowing it to adapt to various terrains. Its high-capacity feeding system ensures efficient material intake, while the advanced screening technology provides accurate separation of fines from larger materials. The C1554 is particularly favored in recycling applications due to its capacity to handle mixed material streams.

The Grizzly C1555 takes efficiency to the next level by incorporating energy-saving technologies. It features a hybrid engine that can operate on electric or diesel power, reducing overall fuel costs and environmental impact. Additionally, the C1555 is designed for easy maintenance, with access points strategically placed for quick servicing, thus minimizing downtime and boosting productivity.

The C1553, known for its durable construction, is designed to handle the most challenging crushing environments. Its heavy-duty chassis and reinforced components ensure longevity and reliability, even under high-stress conditions. This model excels in producing high-quality aggregate materials, making it ideal for construction projects where material specifications are stringent.

Lastly, the C1550 focuses on mobility without compromising productivity. Its compact design allows for efficient transportation, while still being capable of processing large volumes of material. The C1550 includes a range of screening options, giving operators the flexibility to achieve desired material sizes.

In summary, the Grizzly C1552, C1554, C1555, C1553, and C1550 represent a comprehensive lineup of machines tailored to fulfill various industry needs. From advanced engineering and hybrid technology to robust construction and easy maintenance, these models reflect the commitment to quality and innovation that Grizzly is known for.