Operating Instructions & Parts Manual | 3VG80 |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Dayton® Propane
Construction Heater
Description
Dayton Model 3VG80 heater is a variable 65,000, 85,000, and 100,000 Btu/Hr construc- tion heater. This heater uses propane gas for combustion. It is primarily intended for temporary heating of
combustion are vented into the area being heated.
Fire,
burn,
inhalation, and explosion hazard. Keep solid com- bustibles such as build- ing materials, paper or cardboard, a safe dis-
Unpacking
1.Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached to inlet connector and hose/regulator assembly) for storage.
2.Remove all items from carton.
3.Check all items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.
Figure 1 - Model 3VG80
GENERAL HAZARD WARNING
Failure to comply with the precautions and instructions provided with this heater can result in death, serious bodily injury, and prop- erty loss or damage from hazards of fire, explosion, burn, as- phyxiation, carbon monoxide poisoning, and/or electrical shock.
Only persons who can understand and follow instructions should use or service this heater.
If you need assistance or heater information such as an instruction manual, labels, etc. contact the manufac- turer.
tance away from the heater as recommended by the instructions. Never use the heater in spaces which do or may contain volatile or air- borne combustibles, or products such as gaso- line, solvents, paint thinner, dust particles, or unknown chemicals.
Not for home or
recreational vehicle use.
The heater is designed for use as a construc- tion heater under ANSI Z83.7/CGA 2.14. Other standards govern the use of fuel gases and heat producing products for specific uses. Your local authorities can advise you about these. The primary purpose of construction heaters is to provide temporary heating of buildings under construction, alteration or repair, and to provide temporary emergency heat. Properly used, the heater provides safe economical heating. Products of combustion are vented into the area being heated.
We cannot foresee every use which may be made of our heaters. Check with your local fire safety authority if you have questions about heater use.
Form 5S3929
®
Printed in U.S.A. 03430 1002/214/VCPVP
Version B - For Reduction | G016.J |