Drolet ULC S627, UL 1482 Maintenance, Cleaning and Painting Your Stove, Glass, Gasketing

Page 31

SECTION 4.0 MAINTENANCE

4.1CLEANING AND PAINTING YOUR STOVE

Clean the stove frequently so that soot, ash, and creosote do not accumulate. Do not attempt to clean the stove when the unit is hot. Special care must be taken with gold plated surfaces in order to maintain the finish at its original brilliance. Do not use an abrasive cleaner which will scratch the paint or plated finish. Use only a soft and clean damp cloth.

If the paint becomes scratched or damaged, it is possible to give your wood stove a brand new look, by repainting it with a 650oC heat resistant paint. For this purpose, simply scrub the surface to be repainted with fine sand paper, clean it properly, and apply thin coats (2) of paint successively. To retrieve the original finish, use the paint supplied by the manufacturer.

4.2GLASS

Inspect the glass regularly in order to detect any cracks. If you spot one, turn the stove off immediately. Do not use the stove if the glass is broken.

If the glass on your stove breaks, replace only with a glass supplied by your Drolet dealer.

To replace the glass, remove the screws retaining the glass retainers inside the door. Remove the mouldings and replace the damaged piece with a (10 1/8’’ x 16 7/8’’) 5mm thick ceramic glass. Perform the procedure backwards after replacing. When replacing the glass, you should change the glass gasket to make sure you keep it sealed.

Never wash the glass with a product that may scratch it. Use a specialized product, available in the stores where wood stoves are sold. Only wash when the stove is cold.

Under normal operating conditions, the glass is designed to stay clean. Glass cleaning may be required when burning damp wood. Furthermore, small creosote or soot accumulation may occur in the lower end corners of the glass when burning the stove with the air control at the minimum setting. This is normal. The glass will clean itself when burning a hot fire during one hour or more with the air control at its maximum setting. Nevertheless, cleaning the glass on a regular basis is recommended to prevent thicker creosote or soot accumulation that can be very hard to remove.

4.3GASKETING

It is recommended that you change the door gasket (which makes your stove door air tight) once a year, in order to insure good control over the combustion, maximum efficiency and security. To change the door gasket, simply remove the damaged one. Carefully clean the gasket groove, apply a high temperature silicone sold for this purpose, and install the new gasket. Use only the genuine Drolet gasket. You may light up your stove again approximately 24 hours after having completed this operation.

30

Image 31
Contents Read and Keep this Manual for Reference Classic EPA Wood StoveIntroduction Table of Contents Options Technical SpecificationsTips on Wood Heating Clearances InstallationGeneral Installation Positioning the StoveClearances to combustible materials Shielding Reduced clearances using shieldingFloor protector Floor ProtectorDefinitions Chimney Flue SystemChimney Page Stove pipe 1 a Typical installation through the wall Page Page Ceiling support system 1 B Typical Installation Through the Ceiling Page Page 2 a Typical Installation Through an Existing Masonry Chimney Typical installation through an existing masonry chimney2 B Factory Built Thimble 2 C Brick Thimble A Connecting Sections Chimney ConnectorOutside Combustion AIR DraftAdvantage of Installing a Blower FAN Operation Safety InformationFuel Wood species Energy yield Millions of BTU/cord Energy yield for wood species Use of manufactured logsLighting a Fire Simple wood moisture testFAN Blower Operation Maintaining the FireGasketing MaintenanceCleaning and Painting Your Stove GlassASH Removal Using the ASH Drawer Chimney Flue Cleaning Description Drolet Limited Lifetime Warranty

UL 1482, ULC S627 specifications

The Drolet ULC S627 is a highly regarded wood stove designed for efficiency and performance in residential spaces. This model not only meets but exceeds the stringent criteria set by UL 1482 standards, which ensure quality and safety in wood-burning appliances. The S627 represents a blend of traditional craftsmanship and modern technology, making it ideal for homeowners seeking an effective heating solution.

One of the standout features of the Drolet ULC S627 is its impressive heating capacity. With the ability to warm areas of up to 2,000 square feet, it is suitable for medium to large-sized rooms. This makes it an excellent choice for users looking to heat an open floor plan or a cozy cabin. The stove's robust construction and design help to retain and radiate heat efficiently, allowing for a consistent warmth that enhances comfort during colder months.

The S627 employs advanced combustion technology, which allows for cleaner and more complete burning of wood. This results in higher efficiency, translating to reduced wood consumption and lower emissions. The addition of a secondary combustion system ensures that any remaining gases and particulates are burned off, contributing to a cleaner burn. This feature not only complies with environmental regulations but also allows for longer burn times, making it a practical choice for users who prefer less frequent refueling.

Ergonomics is another aspect where the Drolet ULC S627 excels. The stove is designed with a user-friendly door that provides easy access to the firebox for loading wood and cleaning ash. The large glass window allows users to enjoy the mesmerizing visual of the fire while ensuring heat is efficiently radiated into the room. The clean-out system is also conveniently placed to simplify maintenance.

Aesthetic versatility is another highlight of the Drolet ULC S627, as its timeless design allows it to fit into various interior décors. Available in classic black or elegant enamel finishes, it can complement a rustic or modern setting. This blend of functionality and aesthetic appeal makes the stove a focal point within living spaces.

In summary, the Drolet ULC S627, with its strong adherence to UL 1482 standards, offers homeowners an efficient, clean, and visually appealing wood-burning solution. Its impressive heating capabilities, advanced combustion technologies, and thoughtful design make it a compelling choice for those looking to enhance their home heating experience.