Drolet ULC S627, UL 1482 instruction

If you are using a masonry chimney, it is important that it be built in compliance with the specifications of the Building Code. It must be lined with fire clay bricks, or clay tiles, sealed together with fire cement, or have a listed solid fuel burning stainless steel liner. Round chimneys are the most efficient.

The interior diameter of the chimney should be identical to the stove's smoke exhaust. A chimney which is too small may cause draft problems, since it may not have the required volume to properly evacuate the quantity of smoke resulting from the combustion. A chimney whish is too large may also cause draft problems. In fact, a large chimney will be harder to warm-up and may not reach high enough temperatures to create a proper draft effect. Note that it is the chimney which creates the draft effect, not your stove.

Your stove's performance is therefore directly dependent on an adequate draft from your chimney.

The following recommendations may be useful for the installation of your chimney:

•Do not connect your stove to a chimney serving another appliance.

•The chimney must rise above the roof at least 3' (0.9 mm) from the uppermost point of contact. See Figure 2.2.

•The chimney must exceed any part of the building or other obstruction within a 10' (3.04 m) distance by a height of at least 2' (0.6 m). See Figure 2.2.

•The minimum overall height of the chimney system, measured from the stove top to the exterior termination cap of the chimney should be at least 12' (3.66m). A chimney which is too short may lack the “tunnel effect” required to obtain a proper draft.

•Installation of an interior chimney is always preferable to an exterior chimney. Chimneys constructed outside of the home on an exterior wall should be avoided if possible, especially in colder climates. The gas which circulates into an interior chimney will cool more slowly, thus reducing the build-up of creosote and the risk of flue fires.

•All else being equal, cooler chimneys will have less draft than hotter ones. This problem will be amplified if the chimney is excessively long. A chimney which is excessively long may be very hard to warm-up due to its higher volume. A cool chimney may even down draft (reverse flow) due to the difficulty in heating it up to operating temperature while trying to evacuate the stack gases.

•If an exterior chimney is used, the best results will be obtained by using a connector vertically off the unit to the highest possible point before elbowing off horizontally to the exterior chimney. For efficiency and safety reasons the stove must not be installed with an insulated chimney connected directly to the appliance.

•Using a fire screen at the extremity of the chimney requires regular inspection in order to insure that it is not obstructed, thus blocking the draft. It should be cleaned when necessary.

UL 1482, ULC S627 specifications

The Drolet ULC S627 is a highly regarded wood stove designed for efficiency and performance in residential spaces. This model not only meets but exceeds the stringent criteria set by UL 1482 standards, which ensure quality and safety in wood-burning appliances. The S627 represents a blend of traditional craftsmanship and modern technology, making it ideal for homeowners seeking an effective heating solution.

One of the standout features of the Drolet ULC S627 is its impressive heating capacity. With the ability to warm areas of up to 2,000 square feet, it is suitable for medium to large-sized rooms. This makes it an excellent choice for users looking to heat an open floor plan or a cozy cabin. The stove's robust construction and design help to retain and radiate heat efficiently, allowing for a consistent warmth that enhances comfort during colder months.

The S627 employs advanced combustion technology, which allows for cleaner and more complete burning of wood. This results in higher efficiency, translating to reduced wood consumption and lower emissions. The addition of a secondary combustion system ensures that any remaining gases and particulates are burned off, contributing to a cleaner burn. This feature not only complies with environmental regulations but also allows for longer burn times, making it a practical choice for users who prefer less frequent refueling.

Ergonomics is another aspect where the Drolet ULC S627 excels. The stove is designed with a user-friendly door that provides easy access to the firebox for loading wood and cleaning ash. The large glass window allows users to enjoy the mesmerizing visual of the fire while ensuring heat is efficiently radiated into the room. The clean-out system is also conveniently placed to simplify maintenance.

Aesthetic versatility is another highlight of the Drolet ULC S627, as its timeless design allows it to fit into various interior décors. Available in classic black or elegant enamel finishes, it can complement a rustic or modern setting. This blend of functionality and aesthetic appeal makes the stove a focal point within living spaces.

In summary, the Drolet ULC S627, with its strong adherence to UL 1482 standards, offers homeowners an efficient, clean, and visually appealing wood-burning solution. Its impressive heating capabilities, advanced combustion technologies, and thoughtful design make it a compelling choice for those looking to enhance their home heating experience.