Niles Audio RFG manual Introduction, Features And Benefits, Multi-Mode Set-Updipswitches

INTRODUCTION

The Niles RFG Radio Frequency Gateway is a highly flexible tool that allows system designers to add a ZigBee® radio transmitter/receiver to Niles MultiZone products or extend the Radio Frequency Receiver of a Niles HT-MSU Home Theater Main System Unit.

FEATURES AND BENEFITS

MULTI-MODE SET-UP DIPSWITCHES

The RFG has two dipswitches that are set to choose one of the four operation modes: Master Base, Repeater Base, Wireless Keypad and Not Assigned. The mode is determined by the system design.

INSTALLATION FLEXIBILITY

With a low profile design, easy access connections, and wall-mount hole wings, the RFG can be wall mounted behind system components or attached to a baseboard. The high-impact plastic housing is heat resistant, so the RFG can also be mounted in an attic to a crossbeam. System and Keypad connections allows multiple RFGs to be cascade-wired over a single CAT-5 wire run.

RELIABLE ZIGBEE RF COMMUNICATION

The RFG uses a reliable ZigBee based 2.4 Gigahertz radio frequency that works well even in “noisy” RF environments. The RFG has a 16-channel and 16-network ID capability that allows multiple RFGs to be used near each other and in multiple-dwelling units like condos.

RFG EX Model has 10 channels.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373 1