Installation
OUTSIDE
Outside fresh air is mandatory when installing this unit in airtight homes and mobile homes.
A
When connecting to an outside fresh air source, do not use plastic or combustible pipe. A 2” minimum (51
mm)ID (inside diameter) steel, aluminum or copper pipe should be used. It is recommended, when you are installing a fresh air system, to keep the number of bends in the pipe to a minimum.
�������
����
�� ��
��� ���
��������
�����
Figure 7: Outside Air Connection.
EXHAUST AND INTAKE LOCATIONS:
101/16" |
(255mm) |
61/8" |
(156mm) |
21/16" |
(53mm) |
Figure 8: Mini Inlet and Outlet Location.
EXHAUST |
|
|
Base of unit to center of flue | 10 1/16” (255 mm) | |
Center of unit to center of flue | 0” | (0 mm) |
| [at center of unit] | |
FRESH AIR INTAKE. |
|
|
Base of unit to center of intake | 61⁄8” | (156 mm) |
Center of unit to center of intake | 21/16” | (53 mm) |
9