Enviro C-10804 Operating Instructions, Slider / Damper Must be SET AT Time of Installation

Page 6

Operating Instructions

DIMENSIONS - FREESTANDING:

 

 

153/4"

 

(400mm)

 

153/8"

 

(390mm)

247/16"

253/4"

(621mm)

(653mm)

 

273/8"

 

(695mm)

 

243/16"

 

(614mm)

Figure 1: Empress Dimensions.

SLIDER / DAMPER SETTING:

THE SLIDER / DAMPER MUST BE SET AT TIME OF INSTALLATION.

A Qualified Service Technician or Installer must set the Slider Damper.

•If the fire should happen to go out and the heat output indicator has been set on the lowest setting, the Slider Damper should be pushed in slightly, decreasing the air in the firebox.

•If, after long periods of burning, the fire builds up and overflows the burn pot or there is a build up of clinkers, this would be a sign that the pellet quality is poor, this requires more primary air, the slider damper must be pulled out to compensate. Pulling the slider damper out gives the fire more air.

The easiest way to make sure that an efficient flame is achieved is to understand the characteristics of the fire.

•A tall, lazy flame with dark orange tips requires more air – Open slider (pull out) slightly.

•A short, brisk flame, like a blowtorch, has too much air – Close slider (push in) slightly.

•If the flame is in the middle of these two characteristics with a bright yellow/orange, active flame with no black tips then the air is set for proper operation.

The combustion exhaust blower is a variable speed blower controlled by the heat output setting. This blower will increse or decrease the blower speed as the heat output setting is turned up or down.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Empress Table of Contents Introduction Store pellets at least 36 1 m away from the pellet stoveUSE of Cordwood is Prohibited by LAW Keep ASH PAN Free of RAW Fuel Slider / Damper Must be SET AT Time of Installation Operating InstructionsHeat Output Indicator Shows Heat Level Adjustment WhenSpecial Notes Thermostat / Switch Mode Initial START-UP See aboveDoor Glass Cleaning When needed Routine Cleaning and MaintenanceTools Required to Clean Unit Burn POT and Liner 2-3 daysDo not Place Unburned or RAW Pellet Fuel in ASH PAN Firebox Panel Post Season CLEAN-UPCleaning Surfaces Replacing Door GlassWarranty To the DistributorFor the do-it-yourself Individual Installation Data Sheet Name of Owner Address

C-10804, Empress specifications

Enviro Empress, model C-10804, is a cutting-edge integrated environmental management system designed to address the pressing needs of modern sustainability practices. This innovative solution combines advanced technologies to promote eco-friendly operations across various sectors, including agriculture, manufacturing, and urban planning.

One of the main features of the Enviro Empress C-10804 is its comprehensive data analytics capability. By utilizing machine learning algorithms and big data, it collects and analyzes real-time environmental data, allowing users to make informed decisions about resource allocation and waste management. This feature not only minimizes environmental impact but also enhances operational efficiency.

The C-10804 incorporates smart sensor technology, which monitors air and water quality, soil health, and energy consumption. These sensors provide continuous data streams, enabling users to identify potential issues before they escalate. For instance, if air quality drops below acceptable levels, the system can automatically activate air purification measures, ensuring compliance with environmental standards.

Another characteristic of the Enviro Empress is its modular design, allowing for easy scalability and integration into existing systems. This flexibility makes it suitable for small businesses and large enterprises alike. Companies can start with essential features and gradually expand their system as their environmental management needs evolve.

In addition, the C-10804 includes an intuitive user interface, which facilitates easy navigation and data interpretation. Users can visualize their data through customizable dashboards, enabling them to track progress toward sustainability goals efficiently. This feature empowers stakeholders at all levels to engage with environmental initiatives and fosters a culture of accountability within organizations.

Moreover, the Enviro Empress C-10804 supports renewable energy integration, making it easier for users to transition to sustainable power sources. By monitoring energy consumption patterns, the system can identify opportunities for solar or wind energy utilization, contributing to overall carbon footprint reduction.

Overall, Enviro Empress C-10804 is a powerful tool for organizations looking to enhance their environmental performance. With its advanced technologies, data-driven insights, and user-friendly features, it stands as a pivotal solution in the pursuit of sustainability and responsible resource management. As businesses increasingly prioritize environmental stewardship, the Enviro Empress will play a crucial role in shaping a greener future.
Top Page Image Contents