Fisher & Paykel CG602 Safety & Warnings, Before You Start, These products are registered

Page 2

Safety & Warnings

WARNING

Cut Hazard

Beware of sharp edges when handling stainless steel appliances.

Failure to use caution could result in injury or cuts.

WARNINGS!

Particular attention shall be given to the relevant requirements regarding ventilation.

This product should not be sealed into the bench with silicone or glue. Doing so will make future servicing difficult.

Fisher & Paykel will not be liable for costs associated with releasing such a product, nor for repairing damage that may be incurred in doing this.

When this product is installed it shall not be used as a space heater, especially if installed in boats or caravans.

No combustible material or products should be placed on this product at any time.

Do not spray aerosols in the vicinity of this product while it is in operation.

CAUTION!

This product must be installed according to these installation instructions and must comply with local building regulations, local gas authority codes and electrical regulations.

Failure to install the product correctly could invalidate any warranty or liability claims.

IMPORTANT!

Read these instructions carefully before installing or using this product.

Please make this information available to the person responsible for installing the product as it could reduce your installation costs.

These products are registered:

in New Zealand at www.ess.govt.nz and in Australia with AGA at www.gas.asn.au.

Before You Start

Prior to installation, ensure that the local distribution conditions (nature of gas and pressure) and the adjustment of the product are compatible. For adjustment conditions for this product see Gas Rate Summary.

This gas hob must be connected to a 220V - 240V 50Hz power supply only and must be earthed via the power cord.

Ensure a suitable disconnection switch is incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. A means of disconnection with at least a

3 mm air gap contact separation in all poles must be incorporated into the fixed wiring in accordance with the wiring rules, unless the local wiring rules allow for alternative means.

Ensure that there is a power outlet within reach of the cooktop cable (900 mm from the rear right of the product). This must be accessible after installation. The mains cable should not touch any metal parts.

Make the bench top of a heat resistant material.

Seal exposed bare edges of the cutout with an oil-based paint or moisture proof polyurethane to prevent possible damage from moisture creeping between the cooktop trim and the benchtop.

2

Image 2
Contents Installation Instructions NZ & AUThese products are registered Safety & WarningsBefore You Start Make the bench top of a heat resistant materialCutout DimensionsProduct Clearance from side edge 130 mm 120 mm 80 mm ClearancesCG602 Series CG902 Series CG913 Series Clearance from rear edge 100 mm 90 mmGas Supply Connection Standards RequirementsClamping Down the Cooktop Flexible HosesLP Gas Gas Supply Connection CheckNatural Gas Turn on each gas valve and light each burnerCheck all burners have good flame see ,4,5 Minimum Setting or Turn DownTurn on main electrical supply and light the burners Replace the knobCG913TM Gas Rate SummaryCustomer Care Current Information New Zealand
Related manuals
Manual 17 pages 61.9 Kb Manual 11 pages 35.88 Kb

CG602 specifications

The Fisher & Paykel CG602 is a powerful and stylish gas cooktop that exemplifies the brand's commitment to high-quality kitchen appliances. Designed for home chefs who appreciate both aesthetics and functionality, the CG602 boasts an array of impressive features and technologies, making it a standout choice in the realm of cooking equipment.

One of the main features of the CG602 is its six high-efficiency gas burners, which deliver exceptional heat control and precision for various cooking methods. With a combination of high output and low simmer settings, users can easily sauté, boil, or create a delicate simmer—all with the turn of a knob. Specifically, the cooktop includes a powerful 19MJ/h burner, perfect for rapidly boiling water or achieving high-temperature cooking as well as smaller burners designed for simmering sauces and melting chocolate without the risk of burning.

The CG602 is also designed for ease of use and cleaning. The surface is crafted from durable stainless steel, ensuring longevity while being resistant to stains and scratches. This smooth finish makes it easy to wipe down after cooking, and the minimalistic design reduces the risk of food debris getting trapped in crevices, which is particularly advantageous in busy kitchen environments.

Another technological highlight of the CG602 is its intuitive flame failure safety device, which automatically cuts the gas supply if the flame is extinguished. This feature not only enhances safety while cooking but also promotes peace of mind for users concerned about gas leaks or hazards in the kitchen.

Installation is made effortless as the CG602 is designed for easy integration into various countertop designs. It can be seamlessly installed, whether in a contemporary or more traditional kitchen setting. The unit is also compatible with Fisher & Paykel's extensive range of kitchen appliances, allowing for a cohesive aesthetic in any home.

Additionally, the CG602 features convenient removable burner caps and grates, further simplifying cleaning and maintenance. Ultimately, the Fisher & Paykel CG602 is more than just a functional cooktop; it embodies a philosophy of craftsmanship and innovation, designed for culinary enthusiasts who demand both performance and style. This gas cooktop offers a practical and elegant solution for anyone looking to elevate their cooking experience.