Harman Stove Company DVC-500 manual Basement Installation, Corner Installation

Page 11

Installation

Wall Termination

Tee with cover plate

Joint covers

Straight sections

 

fig. 10

Tee with cover plate

11

Basement Installation

To install a DVC 500 in a basement you will need additional DVC vent sections. These sections are made with a 316-grade stainless steel liner and a 20 gauge galvaneeled outer shell. Each joint is sealed with a gasket and is bolted together with 4 bolts. In order to maintain the best seal, there are no adjustable sections. There are straight, 45 degree, and Tee fittings. Refer to Page 14 for all of the sec- tions available.

Never use venting other than Harman DVC venting inside the building. It is the only vent certified for this appliance.

Refer to page 12 & 14 to calculate which sec- tions will be needed for your installation.

Corner Installation

Acorner installation requires a 45 degree section in addition to the standard wall termination.

In order to cut a hole in the wall that will allow the stove to be placed an equal distance to each wall, refer to Page 13.

D

fig. 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Harman DVC-500 Coal Stoker WHI Index Always Empty Hopper Carbon Monoxide CO AwarenessWet Coal Introduction Assembly6 Viewing glass Straight Through Wall Tips On InstallationFloor Protector Do not Install in Mobile Home Sleeping Room Installation Corner Installation Basement InstallationInstallation Installation Maximum Horizontal Run is 48 Inches 4 ft Operation Status Light Error MessagesPage Restarting Fire After Shutdown Testing OperationShutdown Procedure Starting FireWhen to use Room Temp Mode When to use Stove Temp ModeRemoving Ash While Unit Is Burning Ash Out PositionSoot and Fly Ash Cleaning Glass While Unit Is BurningEmpty Fines Tray Maintenance Every 3 Months Prevent Rust Annual ServiceEnd Of Season Shut Down List Fuel Motors23Grate System Assembly Or Replacement Maintenance Schedule Room Sensor Control and Safety SensorsDvC-500 Stocked at depot At depot Specifications30 Stage DVC 500-C Firebox Static Pressure Safety ProtocolBlocked or partially blocked flue pipe. This is At any time, the 2 blink status can be reset byToo high of negative pressure in the area being Opening the viewing door or the ash door forLimited Lifetime Warranty Warranty Conditions Service & Maintenance Log Proudly Printed On 100% Recycled Paper
Related manuals
Manual 36 pages 49.87 Kb

DVC-500 specifications

The Harman Stove Company DVC-500, a prominent model in Harman's lineup, represents the pinnacle of modern pellet stove technology. Designed for both aesthetic appeal and high efficiency, the DVC-500 combines style and functionality to provide an exceptional heating solution for homes.

One of the standout features of the DVC-500 is its user-friendly digital control board. This advanced system allows homeowners to easily adjust settings such as temperature, feed rate, and fan speed, all with the touch of a button. The intuitive interface simplifies operation and enhances the overall user experience. Additionally, the thermostat-compatible feature provides the convenience of maintaining a consistent temperature throughout the home.

The DVC-500 is equipped with a powerful and efficient combustion system that maximizes heat output while minimizing emissions. Its Smart Stove technology continuously monitors and adjusts the combustion process for optimal performance. This ensures that the stove operates at peak efficiency, utilizing less fuel while delivering more heat. As a result, homeowners can enjoy lower energy costs along with an eco-friendlier heating option.

The DVC-500 also boasts a spacious hopper capacity, allowing for extended burn times without the need for frequent refueling. With the ability to hold up to 55 pounds of pellets, users can enjoy hours of consistent warmth and comfort without interruption. The stove's attractive design, available in several finishes, enhances any living space while offering the robust performance expected from Harman products.

Another notable characteristic of the DVC-500 is its easy-to-clean design. The unit features a removable ash pan that simplifies disposal, ensuring that maintenance is hassle-free. Additionally, the heat exchanger is designed for efficient airflow, which enhances the stove's heating capacity while reducing the buildup of soot and debris.

Safety is a critical consideration, and the DVC-500 incorporates several features to ensure peace of mind. The stove includes an integrated safety high-limit switch and a positive-pressure exhaust system that prevents backdraft, making it a reliable choice for any home.

In summary, the Harman Stove Company DVC-500 is a versatile, efficient, and aesthetically pleasing pellet stove that combines advanced technology with ease of use. Its intelligent control systems, high-efficiency combustion, and thoughtful design make it an excellent choice for homeowners seeking a reliable and stylish heating solution. With the DVC-500, Harman continues its legacy of quality craftsmanship and innovative heating solutions.
Top Page Image Contents