Harman Stove Company DVC-500 manual Grate System Assembly Or Replacement

Page 24

grate insert

Fig. 29

Fig.30

grate angle

grate holder

Fig.31

bottom groove

Fig.32

gasket

IMPORTANT

Be sure the grate holder is centered and back

as far as possible.

24

Grate System Assembly Or Replacement:

The DVC500 grate system is composed of four pieces: the grate holder, (2)-63 hole grate inserts, and grate angle. The grate angle is bolted to the grate holder with (2) 3/8 x 1 1/4 bolts. Before installing the grate holder, 3/8" round gasket must be checked in the groove on the bottom side of the grate holder, as shown in Fig 31. Check to be sure the gasket has not been damaged.

The grate holder must be installed through the top door opening after the feeder has been installed.

Locate the flange at the rear of the grate holder into the slot on the feeder as shown below. Bolt the front end down with the 1/4 x 20 allen bolt and nut provided. The rear end will be locked in place by the flange. Before tightening the bolt, be sure the grate holder is back as far as possible and centered side to side on the feeder opening.

Install grate inserts as shown at left. Seal joints with high temp furnace cementcaulking as shown in Fig 30. Insert first grate and squeeze into caulking. Caulk other grate insert, Fig 29, on edge that joins grate already in place. Insert caulked grate in remaining space and squeeze together to make middle joint as tight as pos- sible. Clean any caulking that has pushed out from the joints on top of grates. Let caulking cure before firing.

Install firebricks as shown

Fig.33

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Harman DVC-500 Coal Stoker WHI Index Carbon Monoxide CO Awareness Wet CoalAlways Empty Hopper Introduction Assembly6 Viewing glass Tips On Installation Floor ProtectorStraight Through Wall Do not Install in Mobile Home Sleeping Room Installation Basement Installation Corner InstallationInstallation Installation Maximum Horizontal Run is 48 Inches 4 ft Status Light Error Messages OperationPage Testing Operation Shutdown ProcedureStarting Fire Restarting Fire After ShutdownWhen to use Stove Temp Mode When to use Room Temp ModeAsh Out Position Removing Ash While Unit Is BurningCleaning Glass While Unit Is Burning Empty Fines TraySoot and Fly Ash Maintenance Every 3 Months Annual Service End Of Season Shut Down ListPrevent Rust Motors23 FuelGrate System Assembly Or Replacement Maintenance Schedule Control and Safety Sensors Room SensorDvC-500 Stocked at depot At depot Specifications30 DVC 500-C Firebox Static Pressure Safety Protocol StageAt any time, the 2 blink status can be reset by Too high of negative pressure in the area beingOpening the viewing door or the ash door for Blocked or partially blocked flue pipe. This isLimited Lifetime Warranty Warranty Conditions Service & Maintenance Log Proudly Printed On 100% Recycled Paper
Related manuals
Manual 36 pages 49.87 Kb

DVC-500 specifications

The Harman Stove Company DVC-500, a prominent model in Harman's lineup, represents the pinnacle of modern pellet stove technology. Designed for both aesthetic appeal and high efficiency, the DVC-500 combines style and functionality to provide an exceptional heating solution for homes.

One of the standout features of the DVC-500 is its user-friendly digital control board. This advanced system allows homeowners to easily adjust settings such as temperature, feed rate, and fan speed, all with the touch of a button. The intuitive interface simplifies operation and enhances the overall user experience. Additionally, the thermostat-compatible feature provides the convenience of maintaining a consistent temperature throughout the home.

The DVC-500 is equipped with a powerful and efficient combustion system that maximizes heat output while minimizing emissions. Its Smart Stove technology continuously monitors and adjusts the combustion process for optimal performance. This ensures that the stove operates at peak efficiency, utilizing less fuel while delivering more heat. As a result, homeowners can enjoy lower energy costs along with an eco-friendlier heating option.

The DVC-500 also boasts a spacious hopper capacity, allowing for extended burn times without the need for frequent refueling. With the ability to hold up to 55 pounds of pellets, users can enjoy hours of consistent warmth and comfort without interruption. The stove's attractive design, available in several finishes, enhances any living space while offering the robust performance expected from Harman products.

Another notable characteristic of the DVC-500 is its easy-to-clean design. The unit features a removable ash pan that simplifies disposal, ensuring that maintenance is hassle-free. Additionally, the heat exchanger is designed for efficient airflow, which enhances the stove's heating capacity while reducing the buildup of soot and debris.

Safety is a critical consideration, and the DVC-500 incorporates several features to ensure peace of mind. The stove includes an integrated safety high-limit switch and a positive-pressure exhaust system that prevents backdraft, making it a reliable choice for any home.

In summary, the Harman Stove Company DVC-500 is a versatile, efficient, and aesthetically pleasing pellet stove that combines advanced technology with ease of use. Its intelligent control systems, high-efficiency combustion, and thoughtful design make it an excellent choice for homeowners seeking a reliable and stylish heating solution. With the DVC-500, Harman continues its legacy of quality craftsmanship and innovative heating solutions.
Top Page Image Contents