Harman Stove Company DVC-500 manual Control and Safety Sensors, Room Sensor

Page 26

26

 

 

 

ESP

 

FSS 1-10-163

 

 

FIREBOX STATIC

 

 

SENSOR

 

TCP

X

Stove

1-10-163

This sensor is located in the control box behind the control board. It is preset and is non-adjust- able.

Control and Safety Sensors

ESP

The ESP (Exhaust Sensing Probe) is a temperature sensing probe located in the exhaust outlet. The ESP works with the Control to perform all burn rate func- tions as well as high and low limit control.

Room Sensor

The Room Sensor is a small temperature sensor placed where you would normally put a thermostat. The Room Sensor is extended to the stove with normal thermostat wire. The Room Sensor works with the ESP and the Control to provide the right size fire.

FSS

The FSS (Firebox Static Sensor) is an electronic pressure sensor reading the firebox pressure. The FSS works with the ESP Control to adjust the draft blower speed to compensate for wind and changing house pressures.

TCP

The TCP (Temperature Control Probe) is located on the left side of the feeder. The TCP works with the Control to reduce the feeder temperature if the temperature begins to rise.

TCP

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Harman DVC-500 Coal Stoker WHI Index Always Empty Hopper Carbon Monoxide CO AwarenessWet Coal Introduction Assembly6 Viewing glass Straight Through Wall Tips On InstallationFloor Protector Do not Install in Mobile Home Sleeping Room Installation Basement Installation Corner InstallationInstallation Installation Maximum Horizontal Run is 48 Inches 4 ft Status Light Error Messages OperationPage Starting Fire Testing OperationShutdown Procedure Restarting Fire After ShutdownWhen to use Stove Temp Mode When to use Room Temp ModeAsh Out Position Removing Ash While Unit Is BurningSoot and Fly Ash Cleaning Glass While Unit Is BurningEmpty Fines Tray Maintenance Every 3 Months Prevent Rust Annual ServiceEnd Of Season Shut Down List Motors23 FuelGrate System Assembly Or Replacement Maintenance Schedule Control and Safety Sensors Room SensorDvC-500 Stocked at depot At depot Specifications30 DVC 500-C Firebox Static Pressure Safety Protocol StageOpening the viewing door or the ash door for At any time, the 2 blink status can be reset byToo high of negative pressure in the area being Blocked or partially blocked flue pipe. This isLimited Lifetime Warranty Warranty Conditions Service & Maintenance Log Proudly Printed On 100% Recycled Paper
Related manuals
Manual 36 pages 49.87 Kb

DVC-500 specifications

The Harman Stove Company DVC-500, a prominent model in Harman's lineup, represents the pinnacle of modern pellet stove technology. Designed for both aesthetic appeal and high efficiency, the DVC-500 combines style and functionality to provide an exceptional heating solution for homes.

One of the standout features of the DVC-500 is its user-friendly digital control board. This advanced system allows homeowners to easily adjust settings such as temperature, feed rate, and fan speed, all with the touch of a button. The intuitive interface simplifies operation and enhances the overall user experience. Additionally, the thermostat-compatible feature provides the convenience of maintaining a consistent temperature throughout the home.

The DVC-500 is equipped with a powerful and efficient combustion system that maximizes heat output while minimizing emissions. Its Smart Stove technology continuously monitors and adjusts the combustion process for optimal performance. This ensures that the stove operates at peak efficiency, utilizing less fuel while delivering more heat. As a result, homeowners can enjoy lower energy costs along with an eco-friendlier heating option.

The DVC-500 also boasts a spacious hopper capacity, allowing for extended burn times without the need for frequent refueling. With the ability to hold up to 55 pounds of pellets, users can enjoy hours of consistent warmth and comfort without interruption. The stove's attractive design, available in several finishes, enhances any living space while offering the robust performance expected from Harman products.

Another notable characteristic of the DVC-500 is its easy-to-clean design. The unit features a removable ash pan that simplifies disposal, ensuring that maintenance is hassle-free. Additionally, the heat exchanger is designed for efficient airflow, which enhances the stove's heating capacity while reducing the buildup of soot and debris.

Safety is a critical consideration, and the DVC-500 incorporates several features to ensure peace of mind. The stove includes an integrated safety high-limit switch and a positive-pressure exhaust system that prevents backdraft, making it a reliable choice for any home.

In summary, the Harman Stove Company DVC-500 is a versatile, efficient, and aesthetically pleasing pellet stove that combines advanced technology with ease of use. Its intelligent control systems, high-efficiency combustion, and thoughtful design make it an excellent choice for homeowners seeking a reliable and stylish heating solution. With the DVC-500, Harman continues its legacy of quality craftsmanship and innovative heating solutions.
Top Page Image Contents