Figure a

Char-Broil 5101194 manual Figure a

Page 15

Step 5

Align valve with burner tube. See Figure A for proper valve-to-burner engagement. Secure control panel to body at each end using two #10- 24x3/8” machine screws and two #10-24 hex/keps nuts. Inside body, insert one #10x1/2” self-tap screw through body into panel. It is helpful to have someone hold panel in position while attaching hardware.

#10-24 Hex/Keps Nut inside body.

#10x1/2”	#10-24x3/8”	#10-24
Self-Tap Screw	Machine Screw	Hex/Keps Nut
Qty: 1	Qty: 2	Qty: 2
	Figure A

#10x1/2”	#10-24x3/8”	Burner
	Machine Screw
Self-Tap Screw		Tube
from inside body

Beneath control panel

#10-24x3/8” Machine Screw from inside body

#10-24 Hex/Keps Nut

Step 6

Feed ignitor wire from electrode through opening beneath control panel and attach to ignitor. Press rotary ignitor knob (smaller knob) onto ignitor stem and control knob onto valve stem.

Beneath control panel

Rotary ignitor knob 29000950

Ignitor wire

Control knob 29000951

Image 15

Contents

Char-Broil 5101194 manual Figure a

Step 5

Step 6