![](/images/new-backgrounds/1053839/5383933x1.webp)
Step 9
Place cover assembly onto top. Align lower hinge holes with holes on back side of top. Secure using two #8x1/2”
Cover assembly | #8x1/2” | |
29100873 | ||
| ||
| Qty: 2 |
#8x1/2”
Step 10
LP GAS CYLINDER IS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to Outdoor Stove Top and regulator (see Use & Care section). Once cylinder has been filled and leak checked, place cylinder into cylinder hole in base. Make sure cylinder valve is facing to the rear. Secure cylinder with cylinder screw under base.
Read “Connecting Regulator to the LP Cylinder” in the Use and Care section of this manual.
See Use & Care section of this manual to perform the “Burner Flame Check” and for important safety instructions before using.
Always keep LP cylinders in upright position
during use, transit or storage.
CAUTION
Cylinder valve must face to rear of cart once cylinder is attached. Failure to install cylinder correctly may allow gas hose to be damaged in operation, resulting in the risk of fire.
LP gas cylinder
(not included)
Cylinder screw
17