Igniting the Burners
To ignite the burners, follow these instructions:
1.Lightly press the control knob (shown on the right) and turn the knob anti- clockwise to the maximum position. Press and hold the control down to begin the ignition process (a clicking sound will be heard).
2.Once the burner is lit, adjust the burner power to the required position. To turn the burner off, turn the knob clockwise past the maximum setting to the off position.
The hob are fitted with a
Please note:
•The ignition device should not be operated for more than 15 seconds.
•If a burner does not ignite, or turns off accidentally, turn the control knob to the ‘off’ position, and wait for one minute before attempting to reignite the burner.
•If the burner does not ignite, repeat the ignition process with the burner at the minimum position.
Fig.2
Efficient use of your Hob
The hob is equipped with burners of different sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with flat bottoms and choose an appropriate burner depending on the size of the pan. The most efficient use of the hob is shown below, where the pan and burner are correctly chosen.
Ensure that the pans do not overlap the edge of the pan stand, or cover the control panel.
The table below shows the sizes of pan that should be used with each burner:
Fig.3 |
Burner Size | Minimum Pan Diameter (cm) | Maximum Pan Diameter (cm) | |
Auxiliary | 12 | 14 | |
16 | 20 | ||
Rapid | 20 | 24 | |
|
|
| |
Triple Ring | 24 | 28 | |
|
|
| |
Wok | - | 36 | |
|
|
|