INSTALLATION AND OPERATION MANUAL
MF3500G, MF3500S, MF3500B Models
When the unit is cleaned out, empty the hopper, take the venting apart and clean out the fly ash, rinse and let dry. Inspect the draft blower and clean out all areas such as back heat exchanger and lubricate the auger, auger tube, and fire pot area. (Something like vegetable spray works great to coat the inside of the unit and the moving parts). Clean the glass, doors and outer cabinet so that you are ready for the next heating season. Use of an ash vacuum makes the clean out easier and faster.
Cleaning Tool
TROUBLESHOOTING & repair
At Ardisam, we build quality and durability into the design of our products; but no amount of careful design by us, and careful maintenance by you, can guarantee a
The guide will help you pinpoint the causes of common problems and identify remedies.
For more complicated repairs, you may want to rely on your retailer, an authorized service center or Ardisam, Inc. A parts catalog is included in this section.
We will always be glad to answer any questions you have, or help you find suitable assistance.To order parts or inquire about warranty, call or write us at the address found below, under the section ordering repair parts.
ORDERING REPAIR PARTS
Parts can be obtained from the store where the stove was purchased or direct from the factory. To order from the fac- tory- call, write or
Ardisam, Inc.
1690 Elm Street, Cumberland, Wisconsin 54829
Please include the following information with your order:
1.Part numbers
2.Part description
3.Quantity
4.Model number and serial number
Actuate The Heat Exchanger
Cleaning Rod With Hole End of Tool
Clean Under Fire pot With Small Bend End of Tool
Page 24 | CumberlandStoveWorks.com |