Aarrow Fires SF 50 operating instructions Accessories

Page 16

10. ACCESSORIES

Stands

Elegant stands are available for the Stratford Sf only. These increase the height of the appliance and rear flue outlet by approximately 125mm (6''). Check current brochure for details.

Traceries

For added decorative effect, beautiful Door Traceries (Arches, Dawn & Sunburst) are available for the complete Stratford fires range.

Paint

Matching aerosol paint to tone in any connecting flues, pipes or surrounding metalwork.

Interchangeable Canopy

Traditional canopy (Low) is available for the Stratford Si only. It is easy to fit and can always be added afterward.

Add in Boilers (see fig 11)

A "slab" type add-in-boiler is available for the Stratford Sf only, which occupies the position of the rear firebox liner panel.

Stratford Sf convector units can be fitted with "slab" type boilers only, not "cantilever" type.

Fitting:

•Remove the fuel retainers, rear firebox liner panels and throat plate.

•Knock out the 2 blanking discs corresponding to the terminals on the boiler at the rear of the fire.

•Introduce the boiler to the appliance through the main fire door and locate the terminal pipes through the back plate holes and seal around boiler terminals with fire cement.

•Engage locking nuts to the thread of the terminals and tighten to secure the boiler in position, ready for connection to flow and return pipes.

•Replace, throat plate and fuel retainers.

Note: On boilers the terminal which is approximately flush with the edge of the boiler and marked "TOP" must be fitted uppermost, to prevent "Kettling".

For details of the outputs and sizes for your particular model please see Chart overleaf.

Figure 11

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Stratford Multifuel Sf & Si Stoves Flaming Good Fires Stratford Sf & Si USE of Spare Parts Other than Those Apppliance Guarantee Introduction the Principle of the Fire Solid FuelWood Mixed Solid Fuel and WoodCheck List Stratford Sf Stratford SiGrate bar Replacement Fire BEDGrate Assembling the GrateStratford Sf30 & Sf50 see Stratford Sf70 & Sf90 see FigEffectively Throat Plate InspectionThroat Plate position for Si only AIR System Disassemble Air Wash see fig Summary Sequence of operationsGLASS/TRIM If necessary the glass can be removed as followsDoor Adjustments Spare Parts List Description Sf30 Sf50 Sf70 Sf90Stratford Si Si40 Si60Accessories Fuels Fuel retainer barsPre-lighting checks Check with your installer that Lighting the FirePeat PaperOvernight Burning ASH Removal De-Ashing Solid FuelCleaning Safety Door GlassOther Surfaces Outer FinishGeneral HandlingHearth Combustible MaterialsAIR for Combustion Builders OPENING/CHIMNEY BreastChimney For all appliancesInstalling the Fire Fitting and checking the thermostat Integral Boilers onlyFitting the Flue Outlet and Hot Plate Integral BoilersPositioning Appliance in recess Checking the thermostatBoiler unit only Flues and Chimneys Typical Prefabricated Insulated Chimney System Typical Installations for Integral Boiler Water Connections Final CheckGeneral HOT Water Systems Factory Final Check ListCustomer Registration GuaranteePlease complete the following for your own records Service Record Manufactured by July

SF 50 specifications

The Aarrow Fires SF 50 is an elegantly designed wood burning stove that embodies both functionality and aesthetic appeal. With its sleek lines and contemporary form, the SF 50 serves as a stylish focal point for any room, making it an ideal choice for modern homes.

One of the standout features of the Aarrow Fires SF 50 is its impressive energy efficiency. Utilizing advanced combustion technology, the stove maximizes heat output while minimizing smoke emissions. This efficient design not only provides a warm and inviting atmosphere but also reduces the environmental impact of burning wood. The SF 50 has an efficiency rating that often exceeds 80%, ensuring that the majority of the fuel is converted into usable heat.

The stove is constructed using high-quality materials that ensure durability and longevity. The cast iron door not only adds an element of robustness but also enhances the stove's overall heat retention capabilities. The large glass window on the front door offers a captivating view of the flames, creating a cozy ambiance in any setting. The window is designed with cleanburn technology, which helps to keep the glass clear from soot, providing a beautiful view of the fire without the hassle of frequent cleaning.

Aarrow Fires has also integrated innovative air control systems into the SF 50. The primary air control allows for easy regulation of the fire, enabling users to manage the burn rate and extend the burn time when necessary. This user-friendly feature ensures that homeowners can enjoy a consistent and sustainable heat source throughout the colder months.

The SF 50 is compatible with a variety of flue systems, making it adaptable for different home layouts and installation requirements. It is available in several finishes, allowing homeowners to select a look that seamlessly integrates with their interior design. This versatility ensures that the stove can suit various tastes, from traditional to contemporary styles.

In conclusion, the Aarrow Fires SF 50 presents a perfect balance of elegance, efficiency, and technology. With its high energy efficiency, durable construction, innovative air control features, and aesthetic flexibility, it stands out as a premier choice for those looking to enhance their living space with the warmth and charm of a wood burning stove. Whether for a cozy evening or an extended winter retreat, the SF 50 offers a reliable and stylish heating solution.
Top Page Image Contents