Aarrow Fires SF 50 operating instructions General HOT Water Systems, Factory Final Check List

Page 31

A check list (Pre-lighting Checks) appears in the Operating Instructions, but in addition to this the installer should:

Operate the heating system and set the pump head.

Balance the radiators.

Re-vent and ensure no air locks.

Check the circulation round the primary system and the heat leak radiator, particularly when the pump is running, to ensure circulation is not reversed.

Be sure that the chimney is operating and that ALL smoke and fumes are vented to the atmosphere through the chimney terminal.

Check all joints and seals.

Clean the outside of the appliance to prevent any stains becoming burnt on.

Check the flue draught which should read 1 - 2mm, or 0.1 - 0.2mbar.

Recommended Reading: "The Aarrow Book of the Fire".

"Wood as a Fuel" available from the Forestry Commission.

The following details must be checked and completed by the installer at the time of the installation. Please answer all questions as fully as possible.

Aarrow Fires Ltd cannot be held responsible for chimney or installation.

GENERAL

 

HOT WATER SYSTEMS

 

1.

Date visited site.

/ /

12.

Is the boiler cross-flowed?

YES / NO

2.

Fuel type being used.

 

13.

Are the pipes correctly sized?

YES / NO

3.

Fuel Quality (GOOD/FAIR/BAD)

 

14.

What is the calculated output

 

4.

What is the draught reading?

 

 

required to heat the system?

 

5.

Is the throat plate fitted?

YES / NO

15.

Is a heat leak fitted ?

YES / NO

6.

What is the height of the flue?

 

16.

What is the return water

 

7.

What size is the flue?

 

 

temperature?

 

8.

Is the flue lined?

YES / NO

17.

Is the pump thermostatically

YES / NO

 

 

 

 

controlled by a pipe stat?

 

9.

Does the flue terminate above the

YES / NO

18.

What is the height and distance of

 

 

ridge?

 

 

hot water tank above stove?

 

10.

Did the installer light the fire, check

YES / NO

INSETS

 

 

doors and adjust if necessary?

 

 

 

 

11.

Did the installer explain the correct

YES / NO

19.

Is there insulation around the top

 

 

operation of the appliance?

 

 

of the fire and is it sealed in

 

 

 

 

 

correctly (in accordance with the

 

 

 

 

 

installation instructions)?

 

Please ensure that the customer understands the workings of the appliance and the associated systems. Emphasise the danger of fumes from coal burning equipment and the necessity of regular and frequent sweeping and cleaning of the chimney and the inside of the appliance.

Ensure that they have this copy of the Operating & Installation instructions.

Factory Final Check List

 

QUALITY

 

 

 

FINISH

 

 

 

PARTS

 

 

 

FLUE OUTLET

 

 

 

HOT PLATE

 

 

 

FUEL RETAINERS

 

 

 

GRATE

 

 

 

FIREBOX LININGS

 

 

 

THROAT PLATE

 

Serial Number ………………….

 

AIR WASH

 

 

THERMOSTAT

 

Assembled by……………………

 

DOOR CATCHES

 

 

INTERLOCK

 

Checked by ……………………...

 

ASH PAN

 

 

OPERATING TOOL

 

 

 

OPERATING INSTRUCTIONS

 

 

 

 

 

 

31

 

 

Image 31
Contents Stratford Multifuel Sf & Si Stoves Flaming Good Fires Stratford Sf & Si USE of Spare Parts Other than Those Apppliance Guarantee Mixed Solid Fuel and Wood Introduction the Principle of the FireSolid Fuel WoodStratford Sf Stratford Si Check ListAssembling the Grate Grate bar ReplacementFire BED GrateStratford Sf70 & Sf90 see Fig Stratford Sf30 & Sf50 seeEffectively Throat Plate InspectionThroat Plate position for Si only AIR System Summary Sequence of operations Disassemble Air Wash see figIf necessary the glass can be removed as follows GLASS/TRIMDoor Adjustments Description Sf30 Sf50 Sf70 Sf90 Spare Parts ListSi40 Si60 Stratford SiAccessories Fuel retainer bars FuelsPaper Pre-lighting checks Check with your installer thatLighting the Fire PeatOvernight Burning De-Ashing Solid Fuel ASH RemovalCleaning Outer Finish SafetyDoor Glass Other SurfacesCombustible Materials GeneralHandling HearthFor all appliances AIR for CombustionBuilders OPENING/CHIMNEY Breast ChimneyIntegral Boilers Installing the FireFitting and checking the thermostat Integral Boilers only Fitting the Flue Outlet and Hot PlatePositioning Appliance in recess Checking the thermostatBoiler unit only Flues and Chimneys Typical Prefabricated Insulated Chimney System Typical Installations for Integral Boiler Final Check Water ConnectionsFactory Final Check List General HOT Water SystemsCustomer Registration GuaranteePlease complete the following for your own records Service Record Manufactured by July

SF 50 specifications

The Aarrow Fires SF 50 is an elegantly designed wood burning stove that embodies both functionality and aesthetic appeal. With its sleek lines and contemporary form, the SF 50 serves as a stylish focal point for any room, making it an ideal choice for modern homes.

One of the standout features of the Aarrow Fires SF 50 is its impressive energy efficiency. Utilizing advanced combustion technology, the stove maximizes heat output while minimizing smoke emissions. This efficient design not only provides a warm and inviting atmosphere but also reduces the environmental impact of burning wood. The SF 50 has an efficiency rating that often exceeds 80%, ensuring that the majority of the fuel is converted into usable heat.

The stove is constructed using high-quality materials that ensure durability and longevity. The cast iron door not only adds an element of robustness but also enhances the stove's overall heat retention capabilities. The large glass window on the front door offers a captivating view of the flames, creating a cozy ambiance in any setting. The window is designed with cleanburn technology, which helps to keep the glass clear from soot, providing a beautiful view of the fire without the hassle of frequent cleaning.

Aarrow Fires has also integrated innovative air control systems into the SF 50. The primary air control allows for easy regulation of the fire, enabling users to manage the burn rate and extend the burn time when necessary. This user-friendly feature ensures that homeowners can enjoy a consistent and sustainable heat source throughout the colder months.

The SF 50 is compatible with a variety of flue systems, making it adaptable for different home layouts and installation requirements. It is available in several finishes, allowing homeowners to select a look that seamlessly integrates with their interior design. This versatility ensures that the stove can suit various tastes, from traditional to contemporary styles.

In conclusion, the Aarrow Fires SF 50 presents a perfect balance of elegance, efficiency, and technology. With its high energy efficiency, durable construction, innovative air control features, and aesthetic flexibility, it stands out as a premier choice for those looking to enhance their living space with the warmth and charm of a wood burning stove. Whether for a cozy evening or an extended winter retreat, the SF 50 offers a reliable and stylish heating solution.