Aarrow Fires SF 50 operating instructions Stratford Sf30 & Sf50 see, Stratford Sf70 & Sf90 see Fig

Page 8

4. REFRACTORY LINING FOR Sf CONVECTOR MODELS ONLY

Warning: Refractory linings are very fragile, handle with extreme care.

Stratford Sf Multifuel Convectors are lined with reflective panels, consisting of a combination of rectangular linings, which sit on the rear ledge, and side linings which sit on the landings. A throat plate is sited above the grate, so shaped that it rests on steel guides and between the side linings.

If the refractory linings have not been fitted to your appliance prior to despatch, they should be fitted as follows:

Stratford Sf30 & Sf50 (see Fig 3 & 4)

SF30 CONVECTOR

SF50 CONVECTOR

 

Figure 3

Figure 4

•Remove front fuel retainer bars.

•Set the two linings on the side ledges on either side of the firebox.

•Set the rectangular linings on the upper surface of the grate bar channel at the rear of the firebox.

•Fit the throat plate with the tab at the front marked "Throat plate" pointing down, with the projecting lugs on the sides of the throat plate resting on the top of the baffle landings and the bend at the back resting against the rear refractory lining

•Replace the front fuel retainer bars.

Note: Neither the rear linings nor the side linings are "handed" and both faces are suitable for direct contact with the fire.

Stratford Sf70 & Sf90 (see Fig 5)

SM70 Convector / SM90 Convector

Figure 5

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Stratford Multifuel Sf & Si Stoves Flaming Good Fires Stratford Sf & Si USE of Spare Parts Other than Those Apppliance Guarantee Introduction the Principle of the Fire Solid FuelWood Mixed Solid Fuel and WoodCheck List Stratford Sf Stratford SiGrate bar Replacement Fire BEDGrate Assembling the GrateStratford Sf30 & Sf50 see Stratford Sf70 & Sf90 see FigThroat Plate position for Si only Throat Plate InspectionEffectively AIR System Disassemble Air Wash see fig Summary Sequence of operationsGLASS/TRIM If necessary the glass can be removed as followsDoor Adjustments Spare Parts List Description Sf30 Sf50 Sf70 Sf90Stratford Si Si40 Si60Accessories Fuels Fuel retainer barsPre-lighting checks Check with your installer that Lighting the FirePeat PaperOvernight Burning ASH Removal De-Ashing Solid FuelCleaning Safety Door GlassOther Surfaces Outer FinishGeneral HandlingHearth Combustible MaterialsAIR for Combustion Builders OPENING/CHIMNEY BreastChimney For all appliancesInstalling the Fire Fitting and checking the thermostat Integral Boilers onlyFitting the Flue Outlet and Hot Plate Integral BoilersBoiler unit only Checking the thermostatPositioning Appliance in recess Flues and Chimneys Typical Prefabricated Insulated Chimney System Typical Installations for Integral Boiler Water Connections Final CheckGeneral HOT Water Systems Factory Final Check ListPlease complete the following for your own records GuaranteeCustomer Registration Service Record Manufactured by July

SF 50 specifications

The Aarrow Fires SF 50 is an elegantly designed wood burning stove that embodies both functionality and aesthetic appeal. With its sleek lines and contemporary form, the SF 50 serves as a stylish focal point for any room, making it an ideal choice for modern homes.

One of the standout features of the Aarrow Fires SF 50 is its impressive energy efficiency. Utilizing advanced combustion technology, the stove maximizes heat output while minimizing smoke emissions. This efficient design not only provides a warm and inviting atmosphere but also reduces the environmental impact of burning wood. The SF 50 has an efficiency rating that often exceeds 80%, ensuring that the majority of the fuel is converted into usable heat.

The stove is constructed using high-quality materials that ensure durability and longevity. The cast iron door not only adds an element of robustness but also enhances the stove's overall heat retention capabilities. The large glass window on the front door offers a captivating view of the flames, creating a cozy ambiance in any setting. The window is designed with cleanburn technology, which helps to keep the glass clear from soot, providing a beautiful view of the fire without the hassle of frequent cleaning.

Aarrow Fires has also integrated innovative air control systems into the SF 50. The primary air control allows for easy regulation of the fire, enabling users to manage the burn rate and extend the burn time when necessary. This user-friendly feature ensures that homeowners can enjoy a consistent and sustainable heat source throughout the colder months.

The SF 50 is compatible with a variety of flue systems, making it adaptable for different home layouts and installation requirements. It is available in several finishes, allowing homeowners to select a look that seamlessly integrates with their interior design. This versatility ensures that the stove can suit various tastes, from traditional to contemporary styles.

In conclusion, the Aarrow Fires SF 50 presents a perfect balance of elegance, efficiency, and technology. With its high energy efficiency, durable construction, innovative air control features, and aesthetic flexibility, it stands out as a premier choice for those looking to enhance their living space with the warmth and charm of a wood burning stove. Whether for a cozy evening or an extended winter retreat, the SF 50 offers a reliable and stylish heating solution.
Top Page Image Contents