Multiquip mtr-40hs manual MTR-40HS-TROUBLESHOOTING Guide, Engine Troubleshooting

Page 22

MTR-40HS—TROUBLESHOOTING GUIDE

TABLE 4. ENGINE TROUBLESHOOTING

SYMPTOM

POSSIBLE PROBLEM

SOLUTION

 

 

 

Difficult to start

 

 

 

 

 

 

Ignition plug being bridge?

Check ignition system.

 

 

 

Fuel is available but spark plug

Carbon deposit at ignition?

Clean or replace ignition.

 

 

will not ignite. (Power available at

Short circuit due to defective

Replace insulators.

high tension cable).

insulators?

 

 

 

 

 

 

 

Improper spark gap?

Set spark plug gap to the correct gap.

 

 

 

Fuel is available but spark plug

Short circuit at stop switch?

Check stop switch circuit. Replace stop switch if defective.

will not ignite. (Power NOT

 

 

 

 

available at high tension cable).

Ignition coil defective?

Replace ignition coil.

 

 

 

 

Muffler clogged with carbon

Clean or replace muffler.

 

deposits?

 

 

 

 

Fuel is available and spark plug

Mixed fuel quality is inadequate?

Check fuel to oil mixture.

 

 

 

ignites (compression normal).

 

 

Fuel in use inadequate (water,

Flush fuel sytem and replace with fresh fuel.

 

 

dust)?

 

 

 

 

 

Air Cleaner clogged?

Clean or replace air cleaner.

 

 

 

 

Defective cylinder head gasket?

Tighten cylinder head bolts or replace head gasket.

Fuel is available and spark plug

 

 

Cylinder worn?

Replace cylinder.

ignites (compression low ).

 

 

 

Spark plug loose?

Tighen spark plug.

 

 

 

Operation not satisfactory

 

 

 

 

 

 

Air cleaner clogged?

Clean or replace air cleaner.

 

 

 

Not enough power available

Air in fuel line?

Bleed (remove air) from fuel line.

 

 

(compression normal, no miss-

Fuel level in carbureator float

 

firing).

Adjust carbureator float

chamber improper?

 

 

 

 

 

 

Carbon deposits in cylinder?

Clean or replace cylinder

 

 

 

 

Ignition coil defective?

Flush fuel sytem and replace with fresh fuel.

Not enough power available

 

 

Ignition plug often shorts?

Replace ignition wires, clean ignition.

(compression normal, miss-

 

 

firing).

Fuel in use inadequate (water,

Flush fuel sytem and replace with fresh fuel.

 

 

dust)?

 

 

 

 

 

Mixed fuel quality is inadequate?

Check fuel to oil mixture.

 

 

 

 

 

 

Excessive carbon depostion in

Clean or replace crankcase.

Engine overheats.

combustion chamber?

 

 

 

 

Exhaust or muffler clogged with

Clean or replace muffler.

 

carbon.

 

 

 

 

 

Spark plug heat value incorrect?

Replace spark plug with correct type spark plug.

 

 

 

PAGE 22 — MTR-40HS— PARTS & OPERATION MANUAL — REV. #2 (12/15/03)

Page 21 Page 23
Image 22
Page 21 Page 23
Contents MTR-40HS Page Heres HOW to GET Help Table of Contents Parts Ordering Procedures MTR-40HS Safety Message Alert Symbols MTR40-HS Safety Message Alert Symbols MTR-40HS Rules for Safe Operation Transporting Maintenance SafetyEmergencies MTR-40HS Operation and Safety Decals Construction of Tamping Rammer MTR-40HS General InformationDefinition of Tamping Rammer Rammer Gearbox and Spring CylinderMTR-40HS Specifications MTR-40HS Rammer SpecificationsMTR-40HS- Controls and Components MTR-40HS Basic Engine Engine Controls and ComponentsPrior to Operation InspectionFuel MTR-40HS- Initial START-UP Initial Start-upMTR-40HS- Initial START-UP Operation MTR-40HS- OperationStopping The Engine 200 300 Hours Pre-Cleaner Primary Air CleanerLong Term Storage YearlyManual for specific servicing MTR-40HS Maintenance Engine Engine Maintenance ScheduleMTR-40HS-TROUBLESHOOTING Guide Engine TroubleshootingMTR-40HS-TROUBLESHOOTING Guide Explanation of Code in Remarks Column Items Found In the Items Number ColumnMTR-40HS Rammer 1TO 3 Units MTR-40HS- Nameplate and Decals Decal Gasoline only MTR-40HS- Crankcase and Engine Assy Crankcase & Engine Assy MTR-40HS Guide Cylinder Assy MTR-40HS- Guide Cylinder Assy MTR-40HS-TANK and Handle Assy HOLDER, Cock MTR-40HS-TANK and Handle Assy SW M6 MTR-40HS- Foot ASSY. Option Foot 150B MTR-40HS- Narrow Foot ASSY. Option WASHER, LOCKM10 MTR-40HS-TRENCH Shoe ASSY. Option NUT M12 Robin EC-08HS Engine Crankcase and Cylinder Assy Robin EC-08HS Engine Crankcase and Cylinder Assy Robin EC-08HS Engine Crankshaft and Piston Assy Crank Shaft Robin EC-08HS Engine Governor Assy Governor Lever Robin EC-08HS Engine Muffler Assy Muffler Robin EC-08HS Engine Carburetor and OIL Pump Assy Robin EC-08HS Engine Carburetor and OIL Pump Assy Robin EC-08HS Engine Recoil Starter and Blower Assy FAN Cover Robin EC-08HS Engine AIR Cleaner Assy Element Robin EC-08HS Engine Carburetor Components Assy Robin EC-08HS Engine Carburetor Components Assy NeedleRobin EC-08HS Engine Recoil Starter Components Assy Rope Stopper Robin EC-08HS Engine Magneto Assy Flywheel Robin EC-08HS Engine OIL Pump Assy Robin EC-08HS Engine OIL Pump Assy OIL Pump AssyTerms and Conditions of Sale Parts Page Multiquip INC

mtr-40hs specifications

The Multiquip MTR-40HS is a high-performance portable mixer designed for professionals in various construction and masonry applications. This robust machine is increasingly popular among contractors and builders for its versatility, durability, and efficiency.

One of the main features of the MTR-40HS is its powerful Honda GX160 engine. This reliable engine boasts a horsepower of 5.5, offering ample power to tackle various mixing tasks, from concrete to mortar and other heavy materials. The machine is designed for optimal performance and can handle large loads, making it ideal for large-scale projects where speed and productivity are crucial.

The Multiquip MTR-40HS mixer incorporates a user-friendly design, featuring a 4-cubic-foot mixing capacity. This generous capacity allows users to mix significant quantities of materials in one go, reducing the time spent on tasks and increasing overall efficiency. The mixer is built with a durable steel frame that ensures stability and longevity, even in the harshest job site conditions.

Another standout characteristic of the MTR-40HS is its innovative mixing paddles. These paddles are strategically designed to provide a thorough and even mix, ensuring that materials are combined effectively. This ensures that the final product has the necessary consistency for optimal performance in construction applications.

The MTR-40HS also incorporates advanced safety features, including a protective guard that prevents accidental contact with moving parts. This attention to safety makes the mixer a reliable choice for contractors who prioritize the wellbeing of their crew and job site.

With its heavy-duty wheels, the Multiquip MTR-40HS is easy to transport across different job sites. The design ensures that even when loaded, the mixer can be moved effortlessly, enhancing its usability and functionality.

In summary, the Multiquip MTR-40HS stands out for its powerful engine, generous mixing capacity, durable construction, and innovative design. This mixer is an excellent investment for contractors seeking a reliable and efficient solution for their mixing needs, making it an essential tool in the modern construction industry. Whether for small-scale repairs or large commercial projects, the MTR-40HS delivers performance that professionals trust.
Top Page Image Contents