Multiquip mtr-40hs manual Transporting, Maintenance Safety, Emergencies

Page 9

MTR-40HS — RULES FOR SAFE OPERATION

NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

NEVER Run engine without air filter. Severe engine may occur. Service air filter frequently to prevent carburetor malfunction.

AVOID wearing jewelry or loose fitting clothing that may snag on the controls or moving parts, this can cause a serious injury.

ALWAYS check to make sure that the operating area is clear before starting the engine.

NEVER leave the machine unattended while running.

ALWAYS be sure the operator is familiar with proper safety precautions and operations techniques before using rammer.

ALWAYS read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment.

ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

Refer to the ROBIN Engine Owner's Manual for engine technical questions or information recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

Transporting

ALWAYS shutdown engine before transporting.

Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

Drain fuel when transporting rammer over long distances or bad roads.

When placing the rammer inside a truck-bed for transport, always tie-down the rammer.

ALWAYS use proper lifting techniques when moving the rammer.

Maintenance Safety

NEVER lubricate components or attempt service on a running rammer.

ALWAYS allow the rammer a proper amount of time to cool before servicing.

Keep the rammer in proper running condition.

Fix damage to the rammer immediately and always replace broken parts.

Dispose of hazardous waste properly.Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.

DO NOT use food or plastic containers to dispose of hazardous waste.

Emergencies

ALWAYS know the location of the nearest fire extinguisher.

ALWAYS know the location of the nearest and first aid kit.

In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

MTR-40HS— PARTS & OPERATION MANUAL — REV. #2 (12/15/03) — PAGE 9

Image 9
Contents MTR-40HS Page Heres HOW to GET Help Table of Contents Parts Ordering Procedures MTR-40HS Safety Message Alert Symbols MTR40-HS Safety Message Alert Symbols MTR-40HS Rules for Safe Operation Maintenance Safety TransportingEmergencies MTR-40HS Operation and Safety Decals Definition of Tamping Rammer MTR-40HS General InformationConstruction of Tamping Rammer Rammer Gearbox and Spring CylinderMTR-40HS Rammer Specifications MTR-40HS SpecificationsMTR-40HS- Controls and Components Engine Controls and Components MTR-40HS Basic EngineInspection Prior to OperationFuel Initial Start-up MTR-40HS- Initial START-UPMTR-40HS- Initial START-UP MTR-40HS- Operation OperationStopping The Engine Primary Air Cleaner 200 300 Hours Pre-CleanerYearly Long Term StorageManual for specific servicing Engine Maintenance Schedule MTR-40HS Maintenance EngineEngine Troubleshooting MTR-40HS-TROUBLESHOOTING GuideMTR-40HS-TROUBLESHOOTING Guide Items Found In the Items Number Column Explanation of Code in Remarks ColumnMTR-40HS Rammer 1TO 3 Units MTR-40HS- Nameplate and Decals Decal Gasoline only MTR-40HS- Crankcase and Engine Assy Crankcase & Engine Assy MTR-40HS Guide Cylinder Assy MTR-40HS- Guide Cylinder Assy MTR-40HS-TANK and Handle Assy HOLDER, Cock MTR-40HS-TANK and Handle Assy SW M6 MTR-40HS- Foot ASSY. Option Foot 150B MTR-40HS- Narrow Foot ASSY. Option WASHER, LOCKM10 MTR-40HS-TRENCH Shoe ASSY. Option NUT M12 Robin EC-08HS Engine Crankcase and Cylinder Assy Robin EC-08HS Engine Crankcase and Cylinder Assy Robin EC-08HS Engine Crankshaft and Piston Assy Crank Shaft Robin EC-08HS Engine Governor Assy Governor Lever Robin EC-08HS Engine Muffler Assy Muffler Robin EC-08HS Engine Carburetor and OIL Pump Assy Robin EC-08HS Engine Carburetor and OIL Pump Assy Robin EC-08HS Engine Recoil Starter and Blower Assy FAN Cover Robin EC-08HS Engine AIR Cleaner Assy Element Robin EC-08HS Engine Carburetor Components Assy Needle Robin EC-08HS Engine Carburetor Components AssyRobin EC-08HS Engine Recoil Starter Components Assy Rope Stopper Robin EC-08HS Engine Magneto Assy Flywheel Robin EC-08HS Engine OIL Pump Assy OIL Pump Assy Robin EC-08HS Engine OIL Pump AssyTerms and Conditions of Sale Parts Page Multiquip INC

mtr-40hs specifications

The Multiquip MTR-40HS is a high-performance portable mixer designed for professionals in various construction and masonry applications. This robust machine is increasingly popular among contractors and builders for its versatility, durability, and efficiency.

One of the main features of the MTR-40HS is its powerful Honda GX160 engine. This reliable engine boasts a horsepower of 5.5, offering ample power to tackle various mixing tasks, from concrete to mortar and other heavy materials. The machine is designed for optimal performance and can handle large loads, making it ideal for large-scale projects where speed and productivity are crucial.

The Multiquip MTR-40HS mixer incorporates a user-friendly design, featuring a 4-cubic-foot mixing capacity. This generous capacity allows users to mix significant quantities of materials in one go, reducing the time spent on tasks and increasing overall efficiency. The mixer is built with a durable steel frame that ensures stability and longevity, even in the harshest job site conditions.

Another standout characteristic of the MTR-40HS is its innovative mixing paddles. These paddles are strategically designed to provide a thorough and even mix, ensuring that materials are combined effectively. This ensures that the final product has the necessary consistency for optimal performance in construction applications.

The MTR-40HS also incorporates advanced safety features, including a protective guard that prevents accidental contact with moving parts. This attention to safety makes the mixer a reliable choice for contractors who prioritize the wellbeing of their crew and job site.

With its heavy-duty wheels, the Multiquip MTR-40HS is easy to transport across different job sites. The design ensures that even when loaded, the mixer can be moved effortlessly, enhancing its usability and functionality.

In summary, the Multiquip MTR-40HS stands out for its powerful engine, generous mixing capacity, durable construction, and innovative design. This mixer is an excellent investment for contractors seeking a reliable and efficient solution for their mixing needs, making it an essential tool in the modern construction industry. Whether for small-scale repairs or large commercial projects, the MTR-40HS delivers performance that professionals trust.