accessories
Most accessories are mounted with the universal mount- ing bracket. To install the mounting bracket, loosen knob
(G)on clamp and lower it. Lift clamp and place over handlebar. Bring knob up and tighten. The mounting bracket can be placed anywhere on the handlebar and it will depend on the user’s abilities. It can also be mounted towards the outside or the inside of the handlebar.
N | K | M | G |
|
|
| |
L | J |
| H |
|
|
| |
|
|
| G |
| I |
|
|
Forearm Platforms
Item #s TK 1035 S & TK 1035 L
Install mounting bracket and post at appropriate location. Place forearm platform on mounting bracket post by loos- ening knob (H) and placing forearm platform at desired position.
Forearm platform adjustments
Height – Push in button (I) and slide post to desired posi- tion. Release button and move forearm platform until it clicks into place.
Width – Forearm platforms can be placed closer or far- ther from the user by
•Loosening knob (H) and sliding the forearm platform outward or inward.
•Place mounting bracket with the clamp facing towards the outside or inside of the handlebar.
•Position forearm platform posts (J) facing towards the outside or inside of the handlebar.
Rotation – Loosen knob (H) to rotate up or down and in or out. It can rotate 360°.
Depth – Loosen knob (H) and slide arm pad forward or backward or reposition mounting bracket.
•Loosening knob (K) allows the handgrips to extend forward and backward, supinate and pronate.
•Loosening knob (L) allows wrist angle adjustability.
•Arm strap (M) and wrist strap (N) secures arm.
Handgrips
Item # TK 1045
Install mounting brackets at appropriate location on the handlebar. They can be mounted with the clamp facing towards the outside or inside of the handlebar. To adjust the height, push in button (I) and slide post to desired position. Release button and move handgrip until it clicks into place. Handgrips can rotate in four directions.