Thermador PRD36, PRD48 manual Main Oven Rack Positions, Full Access Oven Rack, Placing Rack In Oven

Models: PRD36 PRD48

1 138
Download 138 pages 57.98 Kb
Page 13
Image 13
Figure 1: Main Oven Rack Positions

Remove all packaging materials and temporary labels from oven and cooktop.

Please, recycle the packaging material as all THERMADOR® packaging is recyclable.

1.Check that you have the items listed in Table 1.

2.Record the Model and Serial number on page 41. See “Data Rating Labels” found on the Rating Label Plate. Rating Label Plate is located on the right side of the range between the oven cavity and side panel (see Figure 35 on Page 41). These may be used for any future contacts with Customer Service. Enter this information on the Product Registration Card included with this product then mail it to the indicated address.

3.Optional Accessories: Grill Plate, Chopping Board, Griddle Cover, Wok Support Ring, Toe Kick, and other accessories are available from your THERMADOR® dealer.

4.Position the racks correctly in the oven. The correct rack position depends on the recipe and the cooking mode. The rack positions are numbered from the bottom of the oven, like an elevator. Rack position 3 is the most frequently used position. Place rack(s) in the proper position before turning on the oven.

IMPORTANT:

Always remove the Full Access® oven racks before self- cleaning the oven. If the gliding racks remain in the oven during Self-Clean, lubricants in the glide mechanisms of each rack will be lost and the finish will discolor.

WARNING:

To help prevent burns, NEVER remove or reposition the oven racks while the oven is ON or while the oven is cooling.

Always remove before Self Clean

5

4

3

2

1

Figure 1: Main Oven Rack Positions

5.THERMADOR Full Access® Oven Racks are standard on all models. Each gliding oven rack can be pulled out and pushed back into the oven with minimal effort — even while supporting a large turkey or roast.

Figure 2: Full Access® Oven Rack

Placing Rack In Oven:

To insert a rack in the oven, hold the rack with the back rail up toward the back. Place the safety hooks under the front of the rail guides. Push the rack into the oven, lifting the rack stops over the front of the rail guides. Slide the rack into position.

When placing food on a rack, pull the rack out to the stop position. The racks are designed to lock and not tilt while in fully-extended position.

English 8

Page 13
Image 13
Thermador PRD36, PRD48 manual Main Oven Rack Positions, Full Access Oven Rack, Placing Rack In Oven