Safety
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Gas and Electrical Requirements and Grounding Instructions
PLEASE READ CAREFULLY
Gas Type Verification
Verify the type of gas supplied to the location. Ensure that the appliance is connected to the type of gas for which it is certified. All models are certified for use with natural gas.
Field conversion of the appliance for use with propane gas supply will require a conversion kit (included). Make certain your range and gas type are the same. Refer to the product rating label which can be located as indicated on Figure 35 on Page 41.
CAUTION:
When connecting the unit to propane gas, make certain the propane gas tank is equipped with its own
IMPORTANT:
All ranges must be installed with a backguard. For island installations and other installations with more than 12” (305mm) minimum horizontal clearance between combustible materials and the back edge of the range, a Flush Island Trim has been supplied with all models. A
THERMADOR® Low Back or High Shelf must be purchased separately and utilized when there is less than a 12” (305mm) horizontal clearance.
Before using the range, ensure that it is equipped with a proper backguard. Refer to the Installation Manual accompanying this appliance for more information.
36" Dual-Fuel Models:
240/208 volts, 60 Hz., 40 Amp electrical circuit required.
48" Dual-Fuel Models:
240/208 volts, 60 Hz., 50 Amp electrical circuit required.
CAUTION:
The High Shelf can get very hot!
DO NOT place the following items on top of the High Shelf:
•plastics or containers that can melt
•flammable items
•a total load over 30 pounds (13.6kg).
WARNING:
ALWAYS DISCONNECT THE ELECTRICAL PLUG FROM THE WALL RECEPTACLE BEFORE SERVICING THIS UNIT.
It is recommended that a dedicated circuit servicing this appliance be provided.
The use of gas cooking appliances results in the production of heat and moisture.
CAUTION:
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE CONNECTED TO A PROPERLY GROUNDED AND POLARIZED ELECTRICAL POWER SUPPLY.
See the Installation Manual for electrical requirements and grounding instructions.
It is the personal responsibility and obligation of you, the user, to have this appliance connected to the electrical power supply by a qualified electrician, in accordance with the National Electrical Code and/or applicable local codes and ordinances.
WARNING:
To avoid possible burn or fire hazard, a backguard designed specifically for this range must be installed whenever the range is used.
English 2
