Graco 255963 important safety instructions Remove Hopper, Replace Gaskets

Page 21

Remove Hopper

1.Check Heating Fluid Level. See page 18.

2.Drain Spray Material. See page 19.

3.Disconnect swivel fitting (202). See FIG. 29.

4.If a transfer pump (H) or agitator (J) is mounted to the hopper:

a.Relieve pressure. See manual 312769.

b.Disconnect air hoses from agitator and feed pump. Disconnect fluid hose from feed pump.

5.Remove bolts (107) and washers (110) from under mounting bracket (101).

101

110

110

107

FIG. 30: Remove Hopper

6.Lift hopper (D) and carefully rest on a flat surface. Use caution to avoid damaging fitting (201).

Repair

Replace Gaskets

The following procedure applies to both the hopper gas- kets (13) and hopper lid gasket (12).

1.Remove old gasket and residual adhesive using MEK solvent.

2.Clean groove in hopper using isopropyl alcohol. Let air dry.

3.Remove adhesive backing from new gasket. Press gasket firmly into groove. Be careful not to stretch gasket material.

4.Trim excess length if necessary.

5.Reassemble rest of hopper parts to keep pressure on gasket.

6.Allow 24 hours for full bonding.

312747L

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Double Wall Hopper Related Manuals ContentsPart Description Approvals Optional AccessoriesFire and Explosion Hazard Pressurized Equipment Hazard Changing Materials Keep Components a and B SeparateDouble Wall Hoppers Mounted on Side of Frame Component IdentificationTemperature Oil Spray material temperatureOverview TimeSides of Frame InstallationConnect Fluid Outlet Assembly to Lower Attach Hopper to Bracket Immersion Heater Kit Optional AccessoriesConnect Immersion Heater Immersion Heater Power CablesConnect Return Tube and Recirculation Hose SetupFill Heating Fluid Install Venting FittingsLeft Side Shown Fill Spray MaterialStartup OperationFlush Hopper ShutdownCheck Heating Fluid Level MaintenanceCheck for Heating Fluid Leakage Drain Heating FluidClosed Ball Valve Drain Spray MaterialRepair Remove Fluid Outlet Assembly KitRemove Immersion Heater Drain Heating Fluid. SeeRemove Hopper Replace GasketsCheck Heating Fluid Level. See Drain Spray Material. See Troubleshooting Problem Cause SolutionImmersion Heater Kit 256257, Troubleshooting 312747L 255963, Double Wall Hopper PartsHopper Cover LID Part Description Qty256259, Double Wall Hopper Mounting Kit Back Mounted Double Wall HopperPart No. Description Qty 201 202 217 203 205 206 256170, Universal Hopper Fluid Outlet KitAccessories Dimensions Technical DataHopper Gallon Heated Compatible HopperHopper Stand Technical Data 312747L Graco Information Graco Standard Warranty

255963 specifications

The Graco 255963 is a versatile and efficient airless paint sprayer designed for both DIY enthusiasts and professional contractors. Known for its powerful performance and user-friendly design, this sprayer can handle a wide range of projects, making it an essential tool in any painter's arsenal.

One of the standout features of the Graco 255963 is its robust motor that provides the capability to spray thick materials with ease. This high-efficiency motor allows for unmatched consistency in spray patterns, ensuring even coverage without the hassle of brush or roller application. The sprayer can handle up to 0.34 gallons of material per minute, making it suitable for larger jobs as well as smaller touch-ups.

The Graco 255963 is equipped with an easy-to-use control system that includes adjustable pressure settings. This feature lets users customize the pressure for different materials, ranging from thin stains to thicker paints. The variable pressure control helps to achieve the desired finish while reducing overspray, saving both time and materials.

Another key technology that enhances the user experience is the sprayer’s SmartControl technology. This innovative system ensures a consistent spray pattern at any pressure, allowing for a professional-looking finish regardless of the project size. Additionally, the Graco 255963 comes with a built-in hose and gun storage, making transportation and storage effortless.

Durability is a hallmark of the Graco brand, and the 255963 is no exception. Constructed with high-quality materials, this paint sprayer is built to withstand the rigors of frequent use on job sites. Furthermore, it features a stainless steel piston pump that provides high pressure, increasing the life expectancy of the equipment.

For user comfort, the Graco 255963 features a lightweight design, allowing for ease of handling during long painting sessions. It also includes an ergonomic handle and trigger that minimizes strain on the hands, making it suitable for prolonged use.

In summary, the Graco 255963 airless paint sprayer stands out due to its powerful motor, adjustable pressure settings, SmartControl technology, and robust construction. Whether for home improvement projects or professional applications, this sprayer delivers efficiency, precision, and quality, making it a reliable choice for any painter.
Top Page Image Contents