Graco 255963 important safety instructions Fire and Explosion Hazard

Page 4

Warnings

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.

WARNING

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

• Use equipment only in well ventilated area.

• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).

•Keep work area free of debris, including solvent, rags and gasoline.

•Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes are present.

•Ground all equipment in the work area. See Grounding instructions.

•Use only grounded hoses.

•Hold gun firmly to side of grounded pail when triggering into pail.

•If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

•Keep a working fire extinguisher in the work area.

•Not for use in explosive atmospheres unless all components and wiring are appropriately approved.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS forms from distributor or retailer.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manu- facturer’s replacement parts only.

•Do not alter or modify equipment.

•Use equipment only for its intended purpose. Call your distributor for information.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or over bend hoses or use hoses to pull equipment.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

ELECTRIC SHOCK HAZARD

This equipment must be grounded. Improper grounding, setup, or usage of the system can cause electric shock.

•Turn off and disconnect power at main switch before disconnecting any cables and before servicing equipment.

•Connect only to grounded power source.

•All electrical wiring must be done by a qualified electrician and comply with all local codes and regu- lations.

4

312747L

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Double Wall Hopper Contents Related ManualsOptional Accessories Part Description ApprovalsFire and Explosion Hazard Pressurized Equipment Hazard Keep Components a and B Separate Changing MaterialsComponent Identification Double Wall Hoppers Mounted on Side of FrameSpray material temperature Temperature OilOverview TimeInstallation Sides of FrameConnect Fluid Outlet Assembly to Lower Attach Hopper to Bracket Optional Accessories Immersion Heater KitImmersion Heater Power Cables Connect Immersion HeaterSetup Connect Return Tube and Recirculation HoseInstall Venting Fittings Fill Heating FluidFill Spray Material Left Side ShownOperation StartupFlush Hopper ShutdownMaintenance Check Heating Fluid LevelCheck for Heating Fluid Leakage Drain Heating FluidDrain Spray Material Closed Ball ValveRemove Fluid Outlet Assembly Kit RepairRemove Immersion Heater Drain Heating Fluid. SeeReplace Gaskets Remove HopperCheck Heating Fluid Level. See Drain Spray Material. See Problem Cause Solution TroubleshootingImmersion Heater Kit 256257, Troubleshooting 312747L Parts 255963, Double Wall HopperPart Description Qty Hopper Cover LIDBack Mounted Double Wall Hopper 256259, Double Wall Hopper Mounting KitPart No. Description Qty 256170, Universal Hopper Fluid Outlet Kit 201 202 217 203 205 206Accessories Technical Data DimensionsHopper Gallon Heated Compatible HopperHopper Stand Technical Data 312747L Graco Standard Warranty Graco Information

255963 specifications

The Graco 255963 is a versatile and efficient airless paint sprayer designed for both DIY enthusiasts and professional contractors. Known for its powerful performance and user-friendly design, this sprayer can handle a wide range of projects, making it an essential tool in any painter's arsenal.

One of the standout features of the Graco 255963 is its robust motor that provides the capability to spray thick materials with ease. This high-efficiency motor allows for unmatched consistency in spray patterns, ensuring even coverage without the hassle of brush or roller application. The sprayer can handle up to 0.34 gallons of material per minute, making it suitable for larger jobs as well as smaller touch-ups.

The Graco 255963 is equipped with an easy-to-use control system that includes adjustable pressure settings. This feature lets users customize the pressure for different materials, ranging from thin stains to thicker paints. The variable pressure control helps to achieve the desired finish while reducing overspray, saving both time and materials.

Another key technology that enhances the user experience is the sprayer’s SmartControl technology. This innovative system ensures a consistent spray pattern at any pressure, allowing for a professional-looking finish regardless of the project size. Additionally, the Graco 255963 comes with a built-in hose and gun storage, making transportation and storage effortless.

Durability is a hallmark of the Graco brand, and the 255963 is no exception. Constructed with high-quality materials, this paint sprayer is built to withstand the rigors of frequent use on job sites. Furthermore, it features a stainless steel piston pump that provides high pressure, increasing the life expectancy of the equipment.

For user comfort, the Graco 255963 features a lightweight design, allowing for ease of handling during long painting sessions. It also includes an ergonomic handle and trigger that minimizes strain on the hands, making it suitable for prolonged use.

In summary, the Graco 255963 airless paint sprayer stands out due to its powerful motor, adjustable pressure settings, SmartControl technology, and robust construction. Whether for home improvement projects or professional applications, this sprayer delivers efficiency, precision, and quality, making it a reliable choice for any painter.
Top Page Image Contents