Model 3200 with a second Model

		In order to transfer data between two Bluetooth devices, they must ﬁrst be “paired” electronically. Pairing is a discovery and
		authentication process that allows your Bluetooth equipped Model 3200 to communicate with another Bluetooth equipped
		device and establishes the link between these two devices as a trusted pair. The pairing process requires user operations to
	English	be performed on both the Model 3200 and the external device. While the Model 3200 can remember trusted pairing with up
	English	to eight different Bluetooth devices, it will only communicate with one paired device at a time. In addition, you cannot pair a

		Model 3200 with a second Model 3200.
	GB	How to pair the Model 3200 with an external device:
	GB	1. Initiate pairing process: On the Model 3200, depress and release the (M) button. The MAIN menu will be displayed.

		Use the (-) button to scroll down to the PAIR option. Select this option by pressing and releasing the (M) button. The LCD
		screen will signal that pairing is in progress with the following animated display:

During the pairing process the Model 3200 will make itself discoverable to other Bluetooth equipped devices.

Note: The Personal Identiﬁcation Number (PIN) for Bluetooth pairing is displayed in the lower left-hand corner of the LCD screen

2.Select Model 3200 on external Bluetooth device: Follow the pairing instructions found with your Bluetooth equipped device. In general, you will need to make sure that the Bluetooth mode is enabled on the device, and once the Model 3200 has indicated the external device has been found, you may need to conﬁrm the connection on the external device. Please remember that the distance between the Model 3200 and the Bluetooth device is limited to no more than 10 meters. If pairing is successful, the LCD display of the Model 3200 will show a ﬂashing Bluetooth icon and the stethoscope will be ready for wireless operations. Once the Model 3200 is connected to the external device, the Bluetooth icon will stop ﬂashing and be displayed continuously.

_ _

Bluetooth icon

If the Bluetooth connection with the external device is subsequently lost or times out, the Bluetooth icon will disappear from the LCD display.

How to transfer real-time data to an external device:

1.Ensure the Model 3200 is paired with the external device.

2.Depress and release the (M) button. Select the CONNECT option by again pressing and releasing the (M) button. The LCD screen will signal that the Bluetooth link is active. The stethoscope will automatically return to operational status. Consult application software for details on initiating real-time transfer, the process may vary by computer platform utilized.

When connected by a Bluetooth link, external Bluetooth-enabled devices may take control of the display and keypad of the Model 3200 stethoscope. The external device may also transfer audio playback or other information through the Model 3200 headset. When the external device transfers audio playback back to the stethoscope, the sounds will be preceded by a beep.

A Bluetooth connection with the stethoscope will automatically be ended if no data transfers occur in a 90 second period. Alternatively, the connection can be manually ended using the DISCONN (disconnect) option of the Main menu. If you are listening to the Model 3200 electronic stethoscope using its Bluetooth feature and you exceed the maximum communication range of approximately 10 meters, you may hear a rapid series of beeps. Should this occur, shorten the physical distance between your Model 3200 and the Bluetooth equipped device.

GB English