Casablanca Fan Company 59083, 59081, 59082 operation manual Ceiling Bracket, Opening toward peak

Page 5

Ceiling Bracket

www.CasablancaFanCo.com

1.888.227.2178

OFF

 

 

 

For angled ceilings, point

 

 

opening toward peak.

 

 

Use wood screws

Use machine screws

 

(included) when securing

(provided with outlet

 

to support structure with

box) when securing to

 

approved electrical outlet

existing ceiling fan-rated

 

box. Drill 9/64” pilot holes

outlet box. Make sure

 

in support structure to aid

it is securely installed

 

in securing ceiling bracket

and is acceptable for fan

 

with hardware found in

support of 31.8 kg (70 lbs)

 

the hardware bag.

or less.

Make sure all four bumpers are

If you are unable to do this,

 

still attached.

call Technical Support at

To avoid possible electrical shock, before

 

1-888-227-2178.

 

installing your fan, disconnect the power by

Refer to warning w.1 on pg. 2

 

turning off the circuit breakers to the outlet

 

box associated with the wall switch location.

 

5

 

 

M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company

Image 5
Contents ? ? Table of ContentsWhat to Expect with Your Installation Tools Needed Ceiling Standard Support Mounting StructureOutlet Box AngledOpening toward peak Ceiling BracketBlades For angled DownrodCeilings or HigherHand Tighten Do not Pick the FAN UP by Put the wires and downrod through the canopyAssembly as shown WiringOM F Using the orange wire connectors from the hardware bagAfter Wall ControlBefore Holes CanopySocket Plug Light KitOperation Battery Holder DoorSpeed LowHigh ReverseOptional Bottom Cap Changing the bulbs carefully rotate the globe Maintenance & CleaningFan doesn’t work TroubleshootingUnpairing Procedure for Faulty Operation of Remote Controls