Light Kit | www.CasablancaFanCo.com |
1.888.227.2178
Socket Plug |
Remove the socket plug from the light bulb socket and put aside for
Bulb |
Install a halogen bulb in the
socket. When necessary, replace
with bulbs of the same type
and wattage.
Globe |
Position the indentations in the outer rim of the globe so they line up with the tabs on the inside of the fan light kit. Carefully lift the globe up inside the light kit as far as it will go, then rotate the globe clockwise until it is held tightly in place by the three tabs.
See next page for fan operation instructions.
When installing a halogen bulb, carefully cut off
the end of the plastic sleeve packaging and hold the bulb by the plastic sleeve to screw it into the socket.
14
Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation.