Casablanca Fan Company 59083, 59081, 59082 operation manual Hand Tighten

Page 8

Downrod (continued)

www.CasablancaFanCo.com

1.888.227.2178

				E




				K	E
				K	P
						!

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at least 4-5 full turns) until it stops.

8”

The wires can be cut, but leave at least 8” extending from the top of the downrod.

Tighten the setscrew with pliers. DO NOT

HAND TIGHTEN.

3/8”

If the setscrew is not tightened securely, the fan may fall.

8

M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company

Image 8

Contents Table of Contents ? ?What to Expect with Your Installation Tools Needed Standard Support Mounting Structure CeilingOutlet Box AngledCeiling Bracket Opening toward peakBlades Downrod For angledCeilings or HigherHand Tighten Put the wires and downrod through the canopy Do not Pick the FAN UP byWiring Assembly as shownUsing the orange wire connectors from the hardware bag OM FAfter Wall ControlBefore Canopy HolesLight Kit Socket PlugBattery Holder Door OperationLow SpeedHigh ReverseOptional Bottom Cap Maintenance & Cleaning Changing the bulbs carefully rotate the globeTroubleshooting Fan doesn’t workUnpairing Procedure for Faulty Operation of Remote Controls