Broan QTR140L Service Parts, Push grille against ceil- ing Remove light lens, Install light bulbs

8. Push grille against ceil- ing.

9. Remove light lens.

Carefully insert a small flat-blade screwdriver be- tween grille and lens. Pry lens out.

10.Install light bulbs.

Purchase an incandes- cent bulb - 100W Max.

Purchase a 4W incan- descent night light bulb.

Insert bulbs into their sockets. Replace lens.

MODEL QTR140L

Page 

SERVICE NOTE

To remove Blower Assem- bly:

Unplug motor (8).

Remove thumbscrew (17) from motor plate (10) flange.

Find the single tab on the motor plate (located next to the receptacle).

Push up near motor plate tab while pushing out on side of housing. Or insert a straight-blade screwdriver into slot in housing (next to tab) and

twist screwdriver.

SERVICE PARTS

Key No.	Part No.	Description	TAB
1	97016466	Housing
2	475	Duct Reducer - 6” to 4”
3	97016450	Duct Connector - 6”
4	98010102	Wiring Plate
5	99170245	Screw, #8-18 X .375
6	97016933	Wire Panel/Harness Assembly
7	99020284	Blower Wheel
8	99080595	Motor
9	99100491	Isolator (4 req’d)
10	97016468	Motor Plate
11	99250959	Washer #8 (4 req’d)
12	99260558	Nut, Hex Lock #8-32 (4 req’d)
*	97017069	Blower Assembly
		(includes key nos. 7 thru 12)
13	97017067	Grille Assembly
		(includes key nos. 14 & 15)
14	99140199	Grille Spring (2 req’d)
15	99111345	Lens
16	99111293	Spacer (2 supplied)
17	99420665	Thumbscrew, #8-18 x .375

Order service parts by “Part No.” - not by “Key No.”

99043902C